Pubblicazioni (DSI) Pubblicazioni degli Afferenti al Dipartimento di Scienze Ingegneristiche Energia e Mobilità 2023 F. Zuccari, G. Tamburrano, L. Del Zotto, R. Caponi, A. Santiangeli, U. Di Matteo, F. Orecchini, E. Bocci “Techno-economic analysis of hydrogen production via photovoltaic, battery and electrolysis: plant sizing and hydrogen cost”, Ltd Journal of Physics: Conference Series, Vol. 2648, 78th ATI Annual Congress (Energy transition: Research and innovation for industry, communities and the territory) (ATI-2023) 14/09/2023 – 15/09/2023 Carpi, Italy J. Phys.: Conf. Ser. 2648 012067DOI 10.1088/1742-6596/2648/1/012067 F. Zuccari, F. Cignini, A. Alessandrini, F. Ortenzi, F. Orecchini, A. Santiangeli, “Comparing the Sustainability of Different Powertrains for Urban Use”. Electronics 2023, Vol. 12, Art. No. 941. https://doi.org/10.3390/electronics12040941 2022 R Caponi, AM Ferrario, L Del Zotto, E Bocci, “Hydrogen refueling stations and fuel cell buses four year operational analysis under real-world conditions”, International Journal of Hydrogen Energy, 2022. V Marcantonio, M De Falco, E Bocci, “Non-Thermal Plasma Technology for CO2 Conversion—An Overview of the Most Relevant Experimental Results and Kinetic Models”, Energies 2022, 15 (20), 7790 R Caponi, E Bocci, L Del Zotto, “Techno-economic model for scaling up of hydrogen refueling stations”, Energies 2022, 15 (20), 7518 Caponi, A. Monforti Ferrario, E. Bocci, S. Bødker, L. del Zotto, “Single-tank storage versus multi-tank cascade system in hydrogen refueling stations for fuel cell buses”, International Journal of Hydrogen Energy 2022, 47 (64), 27633-27645 Bocci, et al. “Investigation of an intensified thermo-chemical experimental set-up for hydrogen production from biomass: Gasification process integrated to a portable purification system—Part II”, Energies 2022, 15 (13), 4580 A Di Carlo, E. Bocci, et al., “Preliminary Results of Biomass Gasification Obtained at Pilot Scale with an Innovative 100 kWth Dual Bubbling Fluidized Bed Gasifier”, Energies 2022, 15 (12), 4369 R Caponi, AM Ferrario, E Bocci, KF Juelsgaard, “Four years of operational data for five hydrogen refueling stations”, E3S Web of Conferences 334 2022, p.06008 Passarella, G.; Lay-Ekuakille, A.; Djungha Okitadiowo, J.P.; Masciale, R.; Brigida, S.; Matarrese, R.; Portoghese, I.; Isernia, T.; Blois, L. An Affordable Streamflow Measurement Technique Based on Delay and Sum Beamforming. Sensors 2022, 22, 2843. https://doi.org/10.3390/s22082843 Fabio Cignini, Adriano Alessandrini, Fabio Orecchini, Adriano Santiangeli, Fabrizio Zuccari, Fernando Ortenzi, “A statistical analysis to compare results of different on-road vehicle performance testing: the Toyota Yaris hybrid case study”. Transportation Research Part D: Transport and Environment, Volume 107, June 2022, 103281, ISSN 1361-9209, https://doi.org/10.1016/j.trd.2022.103281. Publisher: Elsevier Ltd. Orecchini Fabio, Zuccari Fabrizio, Santiangeli Adriano, Chiara Ronzoni, Cecilia Tortora, “Le variabili emissive dell’auto elettrica: ricariche, tragitti e stili di guida”, Febbraio 2022 © 2022 Fondazione Filippo Caracciolo ISBN 9788832245103 2021 Blois, A. Lay-Ekuakille, “Environmental impacts from atmospheric emission of heavy metals: A case study of a cement plant”, Measurement: Sensors, Vol. 18, 2021, 100313, ISSN 2665-9174, https://doi.org/10.1016/j.measen.2021.100313. Zuccari, F. Orecchini, A. Santiangeli, F. Ortenzi, A. Genovese, M.P. Valentini “LPT (Local Public Transport) electric buses: innovative solutions to reduce the energy absorption of auxiliaries”, E3S WEB OF CONFERENCES (JAN 2021) Vol. 312 p. 07013. DOI https://doi.org/10.1051/e3sconf/202131207013 Zuccari, F. Orecchini, A. Santiangeli “Biomethane use for automobiles towards a CO2-neutral energy system”, Clean Energy, Volume 5, Issue 1, March 2021, Pages 124–140, https://doi.org/10.1093/ce/zkab001 Zuccari, F.; Orecchini, F.; Santiangeli, A.; Alessandrini, A.; Cignini, F.; Ortenzi, F. “Real Drive Truth Test of the Toyota Yaris Hybrid 2020 and Energy Analysis Comparison with the 2017 Model”. Energies 2021, 14, 8032. https://doi.org/10.3390/en14238032 Blois L., “A innovative methodology for visual impact assessment of wind power plants”, (2021) proceedings 9^ European Conference on Renewable Energy Systems (ECRES 2021), p. 371-376, Istanbul Turkey, 21-23/04/2021, art. no. ID116. A Colantoni, M Villarini, D Monarca, M Carlini, EM Mosconi, E Bocci “Economic analysis and risk assessment of biomass gasification CHP systems of different sizes through Monte Carlo simulation”, Energy Reports 2021, 7, 1954-1961 R Moradi, M Villarini, E Habib, E Bocci, A Colantoni, L Cioccolanti, “Impact of the expander lubricant oil on the performance of the plate heat exchangers and the scroll expander in a micro-scale organic Rankine cycle system”, Applied Thermal Engineering 2021, Vol. 189, 116714 FI Gallardo, AM Ferrario, M Lamagna, E Bocci, DA Garcia, TE Baeza-Jeria, “A Techno-Economic Analysis of solar hydrogen production by electrolysis in the north of Chile and the case of exportation from Atacama Desert to Japan”, Int. Journal of Hydrogen Energy 2012, Vol. 46 (26), 13709-13728 R Caponi, AM Ferrario, E Bocci, G Valenti, M Della Pietra, “Thermodynamic modeling of hydrogen refueling for heavy-duty fuel cell buses and comparison with aggregated real data”, Int. Journal of Hydrogen Energy 2021 Del Zotto, A Monforti Ferrario, A Hatunoglu, A Dell’Era, S McPhail, E. Bocci, “Experimental Procedures & First Results of an Innovative Solid Oxide Fuel Cell Test Rig: Parametric Analysis and Stability Test”, Energies 2021, Vol. 14 (8), 2038 R Moradi, E Habib, E Bocci, L Cioccolanti, “Component-Oriented Modeling of a Micro-Scale Organic Rankine Cycle System for Waste Heat Recovery Applications”, Applied Sciences 2021, Vol. 11 (5), 1984 Marcantonio V, Müller M, Bocci E, “A Review of Hot Gas Cleaning Techniques for Hydrogen Chloride Removal from Biomass-Derived Syngas”, ENERGIES 2021, vol. 14, ISSN: 1996-1073, doi:10.3390/en14206519 Hatunoglu A, Dell’Era A, Del Zotto L, Di Carlo A, Ciro E, Bocci E, “Deactivation Model Study of High Temperature H2S Wet-Desulfurization by Using ZnO”, ENERGIES 2021, vol. 14, 8019, ISSN: 1996-1073, doi: 10.3390/en14238019 Colantoni A, Villarini M, Monarca D, Carlini M, Mosconi E M, Bocci E, Hamedani S R, “Economic analysis and risk assessment of biomass gasification CHP systems of different sizes through Monte Carlo simulation”, ENERGY REPORTS 2021, vol. 7, p. 1954-1961, ISSN: 2352-4847, doi: 10.1016/j.egyr.2021.03.028 Papa AA, Di Carlo A, Bocci E, Taglieri L, Del Zotto L., “Energy Analysis of an Integrated Plant: Fluidized Bed Steam Gasification of Hydrothermally Treated Biomass Coupled to Solid Oxide Fuel Cells”, ENERGIES 2021, vol. 14, 7331, ISSN: 1996-1073, doi: 10.3390/en14217331 Barisano, G. Canneto, F. Nanna, A. Villone, E. Fanelli, C. Freda, M. Grieco, G. Cornacchia, G. Braccio, V. Marcantonio, E. Bocci, P.U. Foscolo, S. Heidenreich, “Investigation of an Intensified Thermo-Chemical Experimental Set-Up for Hydrogen Production from Biomass: Gasification Process Performance—Part I.”, PROCESSES 2021, vol. 9(7), ISSN: 2227-9717, doi: 10.3390/pr9071104 Marcantonio V, Del Zotto L, Ouweltjes JP, Bocci E, “Main issues of the impact of tar, H2S, HCl and alkali metal from biomass-gasification derived syngas on the SOFC anode and the related gas cleaning technologies for feeding a SOFC system: A review”, Int. Journ. Hydrogen Energy 2021, vol. 47, p. 517-539, ISSN: 1879-3487, doi: 10.1016/j.ijhydene.2021.10.023 2020 Lay-Ekuakille, A., Blois, L., Velazquez, R. “Design of high efficiency polymer probe for geothermal energy transmission and measurement” (2020) Measurement: Journal of the International Measurement Confederation Orecchini, F.; Santiangeli, A.; Zuccari, F. “Real Drive Well-to-Wheel Energy Analysis of Conventional and Electrified Car Powertrains”. Energies 2020, 13(18), 4788; ISSN 1996-1073; https://doi.org/10.3390/en13184788 – 14 Sep 2020 – MDPI Orecchini, A. Santiangeli, F. Zuccari: “Hybrid-electric system truth test: Energy analysis of Toyota Prius IV in real urban drive conditions”. Sustainable Energy Technologies and Assessments, Volume 37, February 2020, 100573, ISSN 2213-1388, https://doi.org/10.1016/j.seta.2019.100573. Publisher: Elsevier Ltd. V Marcantonio, A Monforti Ferrario, A Di Carlo, L Del Zotto, D Monarca, E Bocci, “Biomass Steam Gasification: A Comparison of Syngas Composition between a 1-D MATLAB Kinetic Model and a 0-D Aspen Plus Quasi-Equilibrium Model”, Computation 2020, Vol. 8 (4), 86 R Moradi, E Habib, E Bocci, L Cioccolanti, “Investigation on the use of a novel regenerative flow turbine in a micro-scale Organic Rankine Cycle unit”, Energy 2020, Vol. 210, 118519 AM Ferrario, C Amoruso, RV Robles, L Del Zotto, E Bocci, G Comodi, “Power-to-Gas from curtailed RES electricity in Spain: potential and applications”, 2020 IEEE Int. Conf. Environment and Electrical Engineering A Monforti Ferrario, FJ Vivas, F Segura Manzano, JM Andújar, E Bocci, “Hydrogen vs. Battery in the Long-term Operation. A Comparative Between Energy Management Strategies for Hybrid Renewable Microgrids”, Electronics 2020, Vol. 9 (4), 698 V Marcantonio, E Bocci, JP Ouweltjes, L Del Zotto, D Monarca, “Evaluation of sorbents for high temperature removal of tars, hydrogen sulphide, hydrogen chloride and ammonia from biomass-derived syngas by using Aspen Plus”, Int. Journal of Hydrogen Energy 2020, Vol. 45 (11), 6651-6662 R Moradi, V Marcantonio, L Cioccolanti, E Bocci, “Integrating biomass gasification with a steam-injected micro gas turbine and an Organic Rankine Cycle unit for combined heat and power production”, Energy Conversion and Management 2020, Vol. 205, 112464 V Marcantonio, E Bocci, D Monarca, “Development of a chemical quasi-equilibrium model of biomass waste gasification in a fluidized-bed reactor by using Aspen Plus”, Energies 2020, Vol. 13 (1), 53 2019 Zuccari, F. Orecchini, A. Santiangeli, T. Suppa, F. Ortenzi, A. Genovese, G. Pede: “Well to wheel analysis and comparison between conventional, hybrid and electric powertrain in real conditions of use”. AIP Conference Proceedings 2191, 020158 (2019); ISBN: 978-0-7354-1938-4; https://doi.org/10.1063/1.5138891. Orecchini F., Santiangeli A., Zuccari F., Pieroni A., Suppa T. (2019) “Blockchain Technology in Smart City: A New Opportunity for Smart Environment and Smart Mobility”. In: Vasant P., Zelinka I., Weber GW. (eds) Intelligent Computing & Optimization. ICO 2018 – Pattaya, Thailand, October 4-5, 2018. Advances in Intelligent Systems and Computing, vol 866, pp. 346-354. Springer, Cham. Doi: https://doi.org/10.1007/978-3-030-00979-3_36 A Di Carlo, M Moroni, E Savuto, V Pallozzi, E Bocci, P Di Lillo, “Cold model testing of an innovative dual bubbling fluidized bed steam gasifier”, Chemical Engineering Journal 2019, Vol. 377, 119689 D Bricca, E Bocci, E Santini, “Technical and economic analysis of solar pumping irrigation system for rural areas in Ethiopia”, 2019 IEEE Int. Conf. Environment and Electrical Engineering V Marcantonio, M De Falco, M Capocelli, E Bocci, A Colantoni, M Villarini, “Process analysis of hydrogen production from biomass gasification in fluidized bed reactor with different separation systems”, Int. Journal of Hydrogen Energy 2019, Vol. 44 (21), 10350-1036 V Marcantonio, E Bocci, D Monarca, “Development of a Chemical Quasi-Equilibrium Model of Biomass Waste Gasification in a Fluidized-Bed Reactor by Using Aspen Plus”, Energies 2019, Vol. 13 (1), 1-15 M Villarini, V Marcantonio, A Colantoni, E Bocci “Sensitivity analysis of different parameters on the performance of a CHP internal combustion engine system fed by a biomass waste gasifier”, Energies 2019, Vol. 12 (4), 688 Moradi, R.; Cioccolanti, L.; Bocci, E.; Villarini, M.; Renzi, M. “Numerical investigation on the performance of a regenerative flow turbine for small-scale Organic Rankine Cycle systems”, Journal of Engineering for Gas Turbines and Power, 2019, Vol. 141, 9 Hamedani, S. R.; Del Zotto, L.; Bocci, E.; Colantoni, A.; Villarini, M., “Eco-efficiency assessment of bioelectricity production from Iranian vineyard biomass gasification”, Biomass and Bioenergy, 2019, Vol. 127, 105271 Rajabi Hamedani, S.; Kuppens, T.; Malina, R.; Bocci, E.; Colantoni, A.; Villarini, M., “Life Cycle Assessment and Environmental Valuation of Biochar Production: Two Case Studies in Belgium”, Energies 2019 Vol. 12, 11, 2166 Marcantonio, V.; De Falco, M.; Capocelli, M.; Bocci, E.; Colantoni, A.; Villarini, M., “Process analysis of hydrogen production from biomass gasification in fluidized bed reactor with different separation systems”, International Journal of Hydrogen Energy,2019, Vol. 44,21, p. 10350-10360 Villarini, M.; Marcantonio, V.; Colantoni, A.; Bocci, E., “Sensitivity Analysis of Different Parameters on the Performance of a CHP Internal Combustion Engine System Fed by a Biomass Waste Gasifier”, Energies 2019, Vol. 12, 4, 688. 2018 Barbanera M., Cotana F., Di Matteo U. (2018). “Co-combustion performance and kinetic study of solid digestate with gasification biochar”, RENEWABLE ENERGY, vol. 121, p. 597-605, ISSN: 0960-1481 Orecchini, A. Santiangeli, F. Zuccari, F. Ortenzi, A. Genovese, G. Spazzafumo, L. Nardone: “Energy consumption of a last generation full hybrid vehicle compared with a conventional vehicle in real drive conditions”. ENERGY PROCEDIA, Vol.148, Aug. 2018, p.289–296, doi: http://dx.doi.org/10.1016/j.egypro.2018.08.080 Moradi, R. Tascioni, E. Habib, L. Cioccolanti, M. Villarini, E. Bocci, “Thermodynamic simulation of a small-scale organic Rankine cycle testing facility using R245fa”, Energy Procedia, 2018, Vol. 148, p. 66-73 Monforti Ferrario, E. Bocci, et al. “Techno-economic analysis of in-situ production by electrolysis, biomass gasification and delivery systems for Hydrogen Refuelling Stations: Rome case study”, Energy Procedia, 2018, p. 82-89 Hamedani S. R., Villarini M., Colantoni A., Moretti M., Bocci E., “Life Cycle Performance of Hydrogen Production viaAgro-Industrial Residue Gasification—A Small ScalePower Plant Study”, Energies 2018, 6(7), 3167-3181; doi:10.3390/en6073167 Savuto, E., Navarro, R.M., Mota, N., (…), Carlini, M., Fierro, J.L.G. “Steam reforming of tar model compounds over Ni/Mayenite catalysts: effect of Ce addition”, Fuel 2018, Vol. 224, pp. 676-686 Cioccolanti, L., Tascioni, R., Bocci, E., Villarini, M. “Parametric analysis of a solar Organic Rankine Cycle trigeneration system for residential applications”, Energy Conversion and Management 2018, Vol. 163, p. 407-419 Pallozzi, V., Di Carlo, A., Bocci, E., Carlini, M., “Combined gas conditioning and cleaning for reduction of tars in biomass gasification”, Biomass and Bioenergy 2018, Vol.109, p. 85-90 Informatica e Telecomunicazioni 2023 J. Alexander, M. Bartocci, O. Persico, G. Vetere, “Harnessing ‘Il Manifesto’ Newspaper Archive for Knowledge Base Creation: Techniques and Findings in the ‘MeMa’ Project”, conference CLiC-it, Nov.Dec. 2023, Venice (Italy). Corrado, V. Giliberti, M. Gozzi, V. Lanzolla, G. Vetere, D. Zurlo, “Assisting the Assistant: A Cobot for Voice Customer Support”, Hybrid Human-Artificial Intelligence (HHAI 2023), June 26 – 30, 2023, Munich, Germany, pp.330-339 Gerardi, F. Fallucchi, F. Orecchini, “Blockchain Technology for Monitoring Energy Production for Reliable and Secure Big Data,” Electronics, 2023, Vol. 12, Is. 22, Art. No. 4660 Al-Ansarry, S. Al-Darraji, A. Shareef, D.G. Honi, F. Fallucchi, “Bi-Directional Adaptive Probabilistic Method with a Triangular Segmented Interpolation for Robot Path Planning in Complex Dynamic-Environments,” IEEE Access, 2023, Vol. 11, pp. 87747–87759 Ranaldi, A. Nourbakhsh, A. Patrizi, F. Fallucchi, F.M. Zanzotto, “The Dark Side of the Language: Pre-trained Transformers in the DarkNet,” International Conference Recent Advances in Natural Language Processing, RANLP, 2023, pp. 949–960 G. Ciccarella, F. Vatalaro, R. Giuliano, A. Vizzarri, F. Mazzenga, “Why and How Edge Cloud Computing can address Performance and Economic Sustainability Issues for the Telco Domestic Networks”, ITU Journal on Future and Evolving Technologies (J-FET) – special issue: Innovative network solutions for future services, Vol. 4, Is. 1, Mar. 2023, p. 221-240. https://doi.org/10.52953/OMKR7642; https://www.itu.int/pub/S-JNL-VOL4.ISSUE1-2023-A17 Habib, R. Giuliano, E. Liu, R. L. Aguiar, Editorial of Special issue on “Innovative network solutions for future services”, ITU Journal on Future and Evolving Technologies (J-FET), Vol. 4, Is. 1, Mar. 2023, p. vii-xi, https://www.itu.int/pub/S-JNL-VOL4.ISSUE1-2023, https://www.itu.int/en/journal/j-fet/2022/003/Pages/default.aspx Giuliano, A. M. Vegni, V. Loscrì, E. Innocenti, A. Vizzarri, F. Mazzenga, “MuSLi: a Multi Sensor LiDAR Detection for C-V2X Networks”, Computer Networks, Vol. 221, Feb. 2023, p. 109514. https://doi.org/10.1016/j.comnet.2022.109514 Giuliano, E. Innocenti, “Machine Learning techniques for Non-Terrestrial Networks”, Feature Papers in ‘Networks’ Section, Electronics, Vol. 12, Is. 3, 652, Jan. 2023, https://doi.org/10.3390/electronics12030652 Giuliano, F. Mazzenga, E. Tenaglia, F. Vatalaro, A. Vizzarri, G. Zei, “TEZE: a system to enhance safety in highway tunnels as a new smartphone-based emergency call paradigm”, Topic: Advanced Systems Engineering: Theory and Applications, Electronics, Vol. 12, Is. 2, 333, Jan. 2023, https://doi.org/10.3390/electronics12020333 Vizzarri, F. Mazzenga, R. Giuliano, “Future technologies for train communication: the role of LEO HTS satellites in the Adaptable Communication System”, Sensors 2023, Vol. 23, Is. 1, 68, Dec. 2022, SI: Advances in Intelligent Transportation Systems Based Sensor Fusion. https://doi.org/10.3390/s23010068 Purificato, F. Lorenzo, F. Fallucchi, E.W. De Luca, “The Use of Responsible Artificial Intelligence Techniques in the Context of Loan Approval Processes”, International Journal of Human-Computer Interaction, 2023, 39(7), pp. 1543–1562 2022 Vizzarri, F. Mazzenga, R. Giuliano, A. M. Vegni, “Future Communication Systems for Railway: the AB4Rail project in H2020 Shift2Rail Programme”, Transport Research Arena Conference, Lisbon Portugal, 14 – 17 Nov. 2022 Innocenti, G. Agostini, R. Giuliano, “UAVs for Medicine Delivery in a Smart City Using Fiducial Markers”, MDPI Information, SI: IoT-Based Systems for Safe and Secure Smart Cities, Oct. 22, Vol. 13, 501. https://doi.org/10.3390/info13100501 Giuliano, E. Innocenti, F. Mazzenga, A. M. Vegni, A. Vizzarri “IMPERSONAL: an Iot-aided coMPutER viSiON framework for sociAL distancing for health safety”, IEEE Internet of Things Journal, Special Issue on Sustainable Solutions for the IoT, Vol. 9, Is. 10, May 2022, p. 7261 – 7272. DOI: 10.1109/JIOT.2021.3097590 Giuliano, A. Vizzarri, A. Calderone, F. Mazzenga, “Communication Transport Protocol Strategies for Rail Applications”, Applied Sciences, Mar. 2022, Vol. 12, Is. 6, 3013. Section: Electrical, Electronics and Communications Engineering, Special Issue: Edge Cloud Computing in Telecommunications Ranaldi, L., Gerardi, M., Fallucchi, F., “CryptoNet: Using Auto-Regressive Multi-Layer Artificial Neural Networks to Predict Financial Time Series”, Information 2022, 13(11), 524. Ranaldi, L., Ranaldi, F., Fallucchi, F., Zanzotto, F.M., “Shedding Light on the Dark Web: Authorship Attribution in Radical Forums”, Information, 2022, 13(9), 435 Purificato, L. Boratto, E. W. De Luca, “Do Graph Neural Networks Build Fair User Models? Assessing Disparate Impact and Mistreatment in Behavioural User Profiling”, 31st ACM International Conference on Information and Knowledge Management (CIKM2022), Hybrid Conference, Hosted in Atlanta, Georgia, US, October 17-21, 2022. Sudhi, S. Wehnert, N. M. Homner, S. Ernst, M. Gonter, A. Krug and E. W. De Luca. “BiTe-REx: An Explainable Bilingual Text Retrieval System in the Automotive Domain”, In: Proceedings of the 45th International ACM SIGIR Conference on Research and Development in Information Retrieval (ACM SIGIR 2022). Madrid, Spain, July 11-15, 2022 Purificato, C. Musto, P. Lops and E. W. De Luca. “First Workshop on Adaptive and Personalized Explainable User Interfaces (APEx-UI 2022)”, In: IUI ’22 Companion: 27th International Conference on Intelligent User Interfaces March 2022 Pages 1–3. Fallucchi, B. Ghattas, R. Spielhaus and E. W. De Luca. “Quantitative and Qualitative Analysis of Arabic Textbooks”. In: Special Issue Digital Analysis in Digital Humanities, Jour. of Future Internet, 2022 14 (8), 237; https://doi.org/10.3390/fi14080237 Fallucchi, F., Di Stabile, R., Purificato, E., Giuliano, R., De Luca, E.W., “Enriching videos with automatic place recognition in google maps”, Multimedia Tools and Applications, 2022, 81(16), pp. 23105–23121. Special Issue: 1201 – Video on Demand over Over The Top Platform, https://doi.org/10.1007/s11042-021-11253-9 Purificato, E., Lorenzo, F., Fallucchi, F., De Luca, E.W., “The Use of Responsible Artificial Intelligence Techniques in the Context of Loan Approval Processes”, International Journal of Human-Computer Interaction, 2022 Ranaldi, L., Fallucchi, F., Santilli, A., Zanzotto, F.M., “KERMITviz: Visualizing Neural Network Activations on Syntactic Trees”, Communications in Computer and Information Science, 2022, 1537 CCIS, pp. 139–147 De Luca, E.W., Fallucchi, F., Nobili, C., “Edumeres Toolbox: Functional, Technical, Architectural Analysis”, Communications in Computer and Information Science, 2022, 1537 CCIS, pp. 212–223 Mastromattei, M., Ranaldi, L., Fallucchi, F., Zanzotto, F.M., “Syntax and prejudice: ethically-charged biases of a syntax-based hate speech recognizer unveiled”, PeerJ Computer Science, 2022, 8, e859 Ranaldi L., Fallucchi F., Zanzotto F.M., “Discover ai minds to preserve human knowledge”, 2022, Future Internet, 14, 1, 10, 10.3390/fi14010010 Fallucchi, R. Giugliano, G. Lini, A. Vizzarri, “Location intelligence system for people estimation in indoor environment during emergency operation”, 55-th Hawaii Int.’l Conference on System Sciences (HICSS), Honolulu, Hawaii, US, Jan. 2022, p.5734-5743. 2021 Giuliano, F. Mazzenga, A. V. Vegni, A. Vizzarri, “Adaptable Communication System (ACS) for Flexible Communications in the Transport Sector: the AB4Rail project experience”, 2021 AEIT International Conference on Electrical and Electronic Technologies for Automotive (2021 AEIT AUTOMOTIVE), Virtual Conference, Nov. 2021. Felli, R. Giuliano, “Access Control in woodland through Blockchain and LoRaWAN”, 2021 AEIT International Conference on Electrical and Electronic Technologies for Automotive (2021 AEIT AUTOMOTIVE), Virtual Conference, Nov. 2021. Calderone, R. Giuliano, “Emulation of Rail and Automotive Applications based on Adaptable Communication System”, 2021 AEIT International Conference on Electrical and Electronic Technologies for Automotive (2021 AEIT AUTOMOTIVE), Virtual Conference, Nov. 2021 (Best Paper Award). Innocenti, R. Giuliano, “CNN-based Passenger Detector for Public Transport Vehicles”, 2021 AEIT International Conference on Electrical and Electronic Technologies for Automotive (2021 AEIT AUTOMOTIVE), Virtual Conference, Nov. 2021 (2nd Best Paper Award). Calabrò, R. Giuliano, “Integrated Wi-Fi and LoRa network on UAVs for localizing people during SAR operations”, 2021 AEIT International Conference on Electrical and Electronic Technologies for Automotive (2021 AEIT AUTOMOTIVE), Virtual Conference, Nov. 2021. Cotugno, F. Mazzenga, A. Vizzarri, R. Giuliano, “The major opportunities of Blockchain for Automotive Industry: a Review”, 2021 AEIT International Conference on Electrical and Electronic Technologies for Automotive (2021 AEIT AUTOMOTIVE), Virtual Conference, Nov. 2021. Al-Darraji, D. G. Honi, F. Fallucchi, A. I. Abdulsada, R. Giuliano, H. A. Abdulmalik, “Employee Attrition Prediction using Deep Neural Networks”, MDPI Computers, Nov. 2021, Vol. 10, Is. 11, p.141. Special Issue: Feature Paper in Computers. Giuliano, “The Next Generation Network in 2030: Applications, Services, and Enabling Technologies”, 8th Int.’l Conf. Electrical Engineering, Computer Science and Informatics (EECSI), Oct. 2021, Semarang, Indonesia, p. 294-298, (Best Paper Award). Giuliano, F. Mazzenga, E. Innocenti, F. Fallucchi, I. Habib, “Communication Network Architectures for Driver Assistance Systems”, Sensors, Vol. 21, Is. 20, Oct. 2021, 6867. Doi.org/10.3390/s21206867 Giuliano, F. Mazzenga, E. Innocenti, A. Vizzarri, “Integration of Video and Radio Technologies for Social Distancing”, IEEE Communication Magazine, Vol. 59, Is. 9, Sep. 2021, p. 30-35. Doi: 10.1109/MCOM.011.2001216. Sorino P., Campanella A., Bonfiglio C., Mirizzi A., Franco I., Bianco A., Caruso M.G., Misciagna G., Aballay L.R., Buongiorno C., Liuzzi R., Cisternino A.M., Notarnicola M., Chiloiro M., Fallucchi F., Pascoschi G., Osella A.R., “Development and validation of a neural network for NAFLD diagnosis”, 2021, Scientific Reports, 11, 1, 20240, 10.1038/s41598-021-99400-y De Luca E.W., Fallucchi F., Morelato R., “Teaching an algorithm how to catalog a book”, 2021, Computers, 10, 11, 155, 10.3390/computers10110155 Fallucchi, F., Gerardi, M., “Blockchain, State-of-the-Art and Future Trends”, Scholar’s Yearly Symposium of Technology, Engineering and Mathematics, SYSTEM 2021 Catania 27-29 July 2021. CEUR Workshop Proceedings, Vol. 3092. p. 80-88 Cabroni, A., Fallucchi, F., “An Explainable Model for Diabetes Risk Prediction”, Scholar’s Yearly Symposium of Technology, Engineering and Mathematics, SYSTEM 2021 Catania 27-29 July 2021. CEUR Workshop Proceedings, Vol. 3092. p. 17-25 Ranaldi L., Mastromattei M., Onorati D., Ruzzetti E.S., Fallucchi F., Zanzotto F.M., “KERMIT for sentiment analysis in Italian healthcare reviews”, 2021, CEUR Workshop Proceedings, 3033. Fallucchi F., Cabroni A., “Predicting Risk of Diabetes using a Model based on Multilayer Perceptron and Features Extraction”, 2021, Journal of Computer Science, 17, 9, 748 – 761, 10.3844/JCSSP.2021.748.761 Pieroni A., Cabroni A., Fallucchi F., Scarpato N., “Predictive Modeling Applied to Structured Clinical Data Extracted from Electronic Health Records: An Architectural Hypothesis and A First Experiment”, 2021, Journal of Computer Science, 17, 9, 762 – 775, 10.3844/JCSSP.2021.762.775 Fallucchi F., Gerardi M., Petito M., de Luca E.W., “Blockchain framework in digital government for the certification of authenticity, timestamping and data property”, 2021, Proceedings of the Annual Hawaii International Conference on System Sciences, 2020-January, 2307 – 2316. M. Bianco, R. Giuliano, F. Mazzenga, G. Marrocco, “Multi-Slope Path Loss and Position Estimation with Grid Search and Experimental Results”, IEEE Transactions on Signal and Information Processing over Networks, Vol. 7, Aug. 2021, p. 551-561, doi: 10.1109/TSIPN.2021.3106693. Loscrí, A. M. Vegni, E. Innocenti, R. Giuliano and F. Mazzenga, “A joint Computer Vision and Reconfigurable Intelligent Meta-Surface Approach for Interference Reduction in Beyond 5G Networks,” IEEE 22nd Int. Conf. High Performance Switching and Routing (HPSR), 7–9 June 2021, Paris, France, p. 1-6. M. Bianco, R. Giuliano, G. Marrocco, F. Mazzenga, A. Mejia-Aguilar, “LoRa System for Search and Rescue: Path Loss Models and Procedures in Mountain Scenarios”, IEEE Internet of Things Journal, Vol. 8, Is. 3, Feb. 2020, p. 1985 – 1999. 2020 Berbineau, J. Moreno, S. Kharbech, Y. Yan, A. Vizzari, R. Torrego, J. Soler, L. Clavier, R. Kassi, F. Mazzenga, R. Giuliano, V. Iñaki, C. Gransart, V. Deniau, Y. Cocheril, K. Svensson, “Emulation of various radio access technologies for zero on site testing in the railway domain – The Emulradio4rail platforms”, Proceedings of 8th Transport Research Arena TRA 2020, Helsinki, Finland, 27 – 30 April 2020, p. 10 Mazzenga, R. Giuliano, F. Vatalaro “Effective Strategies for Gradual Copper-to-Fiber Transition in Access Networks”, Computer Networks, Vol. 174, 19 Jun. 2020, p.10. Giuliano, G. C. Cardarilli, C. Cesarini, L. Di Nunzio, F. Fallucchi, R. Fazzolari, F. Mazzenga, M. Re, A. Vizzarri, “Indoor Localization System Based on Bluetooth Low Energy for Museum Applications”, MDPI Electronics, Jun. 2020, Vol. 9, Is. 6, 1055, p.20. Special Issue: Artificial Neural Network Applications in Power Electronics, Communication Networks and IoT. Lorenzetti, L. Morettini, F. Mazzenga, A. Vizzarri, R. Giuliano, P. Peruzzi, C. Di Giovanni, “Blockchain e Internet of Things per la logistica Un caso di collaborazione tra ricerca e impresa”, CNR-IRCrES Working Paper 4/2020, 14 Jul. 2020. ISSN 2421-7158. Giuliano, F. Mazzenga, A. Vizzarri, “Integration of Broadcaster and Telco Access Networks for Real Time/Live Events”, IEEE Transactions on Broadcasting, Vol. 66, Is. 3, Sept. 2020, p.667 – 675. Fallucchi, M. Coladangelo, R. Giuliano, E. W. De Luca, “Predicting Employee Attrition Using Machine Learning Techniques”, MDPI Computers, Nov. 2020, Vol. 9, Is. 4, 86, p. 17. Special Issue: Feature Paper in Computers. Onorati, D., Tommasino, P., Ranaldi, L., Fallucchi, F., Zanzotto, “F.M. Pat-in-the-loop: Declarative knowledge for controlling neural networks”, Future Internet 2020, 12(12), 218; https://doi.org/10.3390/fi12120218 Fallucchi F, De Luca EW (2020). “CMDIfication process for textbook resources”, International journal of metadata, semantics and ontologies, vol. 14, p. 135-148, ISSN: 1744-2621, doi: 10.1504/IJMSO.2020.108331 Scheel C, Fallucchi F, De Luca EW (2020). “Visualization, Interaction and Analysis of Heterogeneous Textbook Resources”. Future internet, vol. 12, ISSN: 1999-5903, doi: 10.3390/fi1210017 Petito M, Fallucchi F, De Luca EW (2020). “Semantic architectures and dashboard creation processes within the data and analytics framework”, International journal of metadata, semantics and ontologies, vol. 14, p. 1-15, ISSN: 1744-2621, doi: 10.1504/IJMSO.2020.107790 Fallucchi F, Gerardi M, Petito M, De Luca EW (2020). “Blockchain Framework in Digital Government for the Certification of Authenticity, Timestamping and Data Property”, Proceedings of the annual Hawaii Int. conference on system sciences, ISSN: 1530-1605 Zanzotto FM, Santilli A, Ranaldi L, Onorati D, Tommasino P, Fallucchi F (2020). “KERMIT: Complementing Transformer Architectures with Encoders of Explicit Syntactic Interpretations”, In: Proceedings of the 2020 Conference on Empirical Methods in Natural Language Processing (EMNLP). 16th-20th Nov. 2020 Scano, F. Fallucchi, E. W. De Luca, (2020). “Machine Learning Models Applied to Weather Series Analysis”, In Proc of the 14th Int. Conf. on Metadata and Semantics Research, MTSR 2020, Madrid, Spain 2-4 December, 2020, ISBN 978-3-030-71902-9. 2019 Mazzenga, R. Giuliano, F. Vatalaro, “Sharing of Copper Pairs for Improving DSL Performance in FTTx Access Networks”, IEEE ACCESS, Vol. 7, Is. 1, Jan. 2019, p. 6637 – 6649. W. De Luca, F. Fallucchi, R. Giuliano, G. Incarnato, F. Mazzenga, “Analysing and visualizing Tweets for U.S. President popularity”, International Journal on Advanced Science, Engineering and Information Technology, Vol. 9, Is. 2, Apr. 2019, p. 692-699. ISSN: 2088-5334 DOI: 10.18517/ijaseit.9.2.8284 [Online]. Available: http://www.insightsociety.org/ojaseit/index.php/ijaseit/article/download/8284/1940 Ciccarella, R. Giuliano, F. Mazzenga, F. Vatalaro, A. Vizzarri, “Edge cloud computing in telecommunications: Case studies on performance improvement and TCO saving”, IEEE Int. Conf. Fog Mob. Edge Comp. (FMEC 2019), Rome, Italy, Jun. 2019, p.113-120. Giuliano, F. Mazzenga, A. Vizzarri, “Satellite-based capillary 5G-mMTC networks for environmental applications”, IEEE Aerospace and Electronic Systems Magazine, Vol. 34, Is. 10, Oct. 2019, p. 40 – 48. Mazzenga, R. Giuliano, “Analysis of Zero-Forcing Vectoring for VDSL2 and Long Reach VDSL Technologies”, IEEE Transactions on Communications, Vol. 67, Is. 11, Nov. 2019, p. 7811 – 7823. Garoufallou, E, Fallucchi F, De Luca EW (2019). Metadata and Semantic Research: 13th International Conference, MTSR 2019, Rome, Italy, October 28–31, 2019, Revised Selected Papers. COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 1057, Cham, Switzerland: Springer nature, ISBN: 978-3-030-36598-1, ISSN: 1865-0929, doi: 10.1007/978-3-030-36599-8 De Luca E.W., Fallucchi F., Ligi A., Tarquini M (2019). “A Research Toolbox: A Complete Suite for Analysis in Digital Humanities”. COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 1057 CCIS, p. 385-397, ISSN: 1865-0929, doi: 10.1007/978-3-030-36599-8_35 Fallucchi F, De Luca EW (2019). “Connecting and Mapping LOD and CMDI Through Knowledge Organization”, COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 846, p. 291-301, ISSN: 1865-0929, doi: 10.1007/978-3-030-14401-2_27 Michele P., Fallucchi F., De Luca E.W. (2019). “Create Dashboards and Data Story with the Data & Analytics Frameworks”, COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 1057 CCIS, p. 272-283, ISSN: 1865- 0929, doi: 10.1007/978-3-030-36599-8_24 Fallucchi F., Petito M., De Luca E.W. (2019). “Analysing and Visualising Open Data Within the Data and Analytics Framework”, COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 846, p. 135-146, ISSN: 1865-0929, doi: 10.1007/978-3-030-14401-2_13 Fallucchi F, Steffen H, De Luca EW (2019). “Creating CMDI-Profiles for Textbook Resources”, COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 846, p. 302-314, ISSN: 1865-0929, doi: 10.1007/978-3-030-14401-2_28 Scheel, C., De Luca, E. W., “Fusing International Textbook Collections for Textbook Research”, Digital Cultural Heritage. Hrsg. / Horst Kremers. Cham: Springer Verlag, 2019. S. 99-107 De Luca, E. W., Spielhaus, R., “Digital Transformation of Research Processes in the Humanities”, Metadata and Semantic Research – 13th International Conference, MTSR 2019, Rome, Italy, October 28-31, 2019, Revised Selected Papers. / Emmanouel Garoufallou ; Francesca Fallucchi ; Ernesto William De Luca. Springer, 2019. S. 343-353 (Communications in Computer and Information Science; 1057). 2018 Mazzenga, R. Giuliano, “A Worst Case Performance Analysis of Approximated Zero Forcing Vectoring for DSL Systems”, MDPI Information 2018, 9, 108, p.1-17. Pieroni, A., Scarpato, N., Di Nunzio, L., Fallucchi, F., Raso, M., “Smarter City: Smart energy grid based on Blockchain technology”, International Journal on Advanced Science, Engineering and Information Technology, 8 (1), 2018, p. 298—306, doi: 10.18517/ijaseit.8.1.4954. Castellanos, A., De Luca, E.W., García-Serrano, A., Cigaran, J., “Partially squeezing the resources of the web of data towards applications” 2017 Intelligent Systems Conference, IntelliSys 2017, 2018, 2018-January, pp. 358–365 Matematica e Fisica 2023 S. Viaggiu, “Physically viable rotating mass solutions surrounding Kerr black holes”, Class. Quantum Grav. Vol. 40, n. 215003, Oct 2023, pp.17, 10.1088/1361-6382/acfbe3 S. Viaggiu, “A new class of anisotropic rotating fluids and some throat-like sources for Kerr metric as examples”, International Journal of Modern Physics, Jan. 2023. 2022 Viaggiu, “On the perturbative formalism and a possible quantum discrete spectrum for the Regge-Wheeler equation of a de Sitter spacetime”, International Journal of Geometric Methods in Modern Physics, Volume 19, Issue 12, id. 2250189-1131 (2022) G. Belolipetskaia, A. A. Boitsev, S. Fassari, I. Y. Popov, F. Rinaldi, “Two-Dimensional Helmholtz Resonator with Two Close Point-Like Windows: Regularization for the Neumann Case”, Methods of Functional Analysis and Topology (MFAT), Vol. 28 (2022), no. 2, pp. 95–104 Iazeolla, P. Sundell, “Unfolding, higher spins, metaplectic groups and resolution of classical singularities”, published in Proceedings of Science, CORFU2021 (2022) 276, 43 pages, DOI: https://doi.org/10.22323/1.406.0276 Fassari, M. Gadella, L-M. Nieto, F. Rinaldi, “On Hermite Functions, Integral Kernels, and Quantum Wires”, Mathematics 2022, 10(16), 3012; https://doi.org/10.3390/math10163012 De Filippi, C. Iazeolla, P. Sundell, “Metaplectic representation and ordering (in)dependence in Vasiliev’s higher spin gravity”, in Journal of High-Energy Physics, JHEP 07 2022, 003, 104 pages, doi:10.1007/JHEP07(2022)003 2021 Rinaldi, “The Schrödinger particle on the half-line with an attractive delta-interaction: bound states and resonances” EPJP – European Physical Journal Plus (2021) Rinaldi, “The Energy of the Ground State of the Two-Dimensional Hamiltonian of a Parabolic Quantum Well in the Presence of an Attractive Gaussian Impurity” Symmetry (2021) Rinaldi, “The Quantum harmonic oscillator and the Catalan’s constant” ROMP – Reports on Mathematical Physics (2021) Viaggiu, “The physical nature of the cosmological constant and the decoherence scale in renormalization-group approach”, International Journal of Modern Physics D, 2021, Vol. 30 Issue No. 06, Article No. 2150043 Viaggiu et al., “Einstein, Planck end Vera Rubin: relevant encountersa between the cosmological and the quantum worlds”, Front. Phys. 2021. https://doi.org/10.3389/fphy.2020.603190. Fontana, M. Martini, F. Offi, R. Di Capua, “Presentation and development of a Physics experiment devised for didactic learning: The Lambert-Beer-Bouguer law”, SIF Congress 2020, Published online 1 Sep. 2021, Art. 163. DOI: 10.1393/ncc/i2021-21163-9 2020 Pazzaglia, G. Briganti, M. Mancuso, A. Saran, “Neurocognitive Decline Following Radiotherapy: Mechanisms and Therapeutic Implications”, Cancers (Basel) 2020 Jan; 12(1): 146. doi: 10.3390/cancers12010146 Viaggiu “A proposal for Heisenberg uncertainty principle and STUR for curved back- grounds: an application to white dwarf, neutron stars and black holes”, Class. Quant. Grav. (2020) https://doi.org/10.1088/1361-6382/abc907 Fassari, S., Nieto, L.M. & Rinaldi, F. The two lowest eigenvalues of the harmonic oscillator in the presence of a Gaussian perturbation. Eur. Phys. J. Plus 135, 728 (2020). https://doi.org/10.1140/epjp/s13360-020-00761-6 Fassari, I. Popov, F. Rinaldi, “On the behaviour of the two-dimensional Hamiltonian -\Delta+\lambda [\delta (\vec{x}+{\vec{x}}_{0})+\delta (\vec{x}-{\vec{x}}_{0})]$ as the distance between the two centres vanishes”, Physica Scripta, Vol. 95, No. 7, 12 May 2020. https://doi.org/10.1088/1402-4896/ab8f3f Iazeolla, “On boundary conditions and spacetime/fibre duality in Vasiliev’s higher-spin gravity”, in Proceedings of Science, CORFU2019 (2020) 181, p.53 2019 Fassari, F. Rinaldi, S. Viaggiu, “The 3D Perturbed Schrödinger Hamiltonian in a Friedmann Flat Spacetime Testing the Primordial Universe in a Non Commutative Spacetime”, Math. Phys. Anal. Geom. (2019) 22: 4 .2, https://doi.org/10.1007/s11040-019-9302-z Viaggiu “The physical origin of the cosmological constant: continuum limit and the analogy with the Casimir effect”, Physica Scripta (2019) Volume 94, Number 12, 125014. Viaggiu “The cosmological constant from Planckian fluctuations and the averaging procedure”, Found. of Physics (2019) Volume 49, 119, 1287. Albeverio, S. Fassari, M. Gadella, L. M. Nieto, F. Rinaldi, “The Birman-Schwinger Operator for a Parabolic Quantum Well in a Zero-Thickness Layer in the Presence of a Two-Dimensional Attractive Gaussian Impurity”, Frontiers in Physics, Vol. 7, 2019, p. 102, doi 10.3389/fphy.2019.00102 https://www.frontiersin.org/article/10.3389/fphy.2019.00102 Fassari, M. Gadella, M. L. Glasser, L. M. Nieto, F. Rinaldi “Spectral properties of the two-dimensional Schrödinger Hamiltonian with various solvable confinements in the presence of a central point perturbation”, Physica Scripta, Vol. 94, No. 5, 6 March 2019 Fassari, F. Rinaldi “Exact calculation of the trace of the Birman–Schwinger operator of the one-dimensional harmonic oscillator perturbed by an attractive Gaussian potential” – NANOSYSTEMS: PHYSICS, CHEMISTRY, MATHEMATICS 2019, 10 (6), P. 608–615, https://doi.org/10.17586/2220-8054-2019-10-6-608-615 Aros, C. Iazeolla, P. Sundell, Y. Yin, “Higher-spin fluctuations on spinless 4D BTZ black hole”, in JHEP 1908 (2019) 171, p. 83 De Filippi, C. Iazeolla, P. Sundell, “Fronsdal fields from gauge functions in Vasiliev’s higher-spin gravity”, in JHEP 1910 (2019) 215, p.93 2018 Viaggiu, “Building a linear equation of state for trapped gravitons from finite size effects and the Schwarzschild black hole case”, Int. J. Mod. Phys. D 27 (2018) 1850061. Viaggiu, “Statistical description of massless excitations within a sphere with a linear equation of state and the dark energy case”, Int. J. Mod. Phys. A 33 (2018) 1850074. Fassari, F. Rinaldi, S. Viaggiu “The spectrum of the Schrödinger-Hamiltonian for trapped particles in a cylinder with a topological defect perturbed by attractive delta interactions”, International Journal of Geometric Methods in Modern Physics 15(8) (2018) 1850135. https://doi.org/10.1142/S0219887818501359 Viaggiu, “On a physical description and origin of the cosmological constant”, Class. Quantum Grav. 35 (2018) 215011. Viaggiu, “An algorithm to generate anisotropic rotating fluids with vanishing viscosity”, Eur. Phys. J. Plus (2018) 133: 551. Viaggiu, “A quantum Friedmann flat spacetime: Uncertainty Relations, Thermodynamics and some cosmological consequences”, Contributed paper to the Fourteenth Marcel Grossmann Meeting on General Relativity, University of Rome “La Sapienza”, Italy, 12 – 18 July 2015; edited by Massimo Bianchi, Robert T Jantzen, Remo Ruffini. (World Scientific, Singapore, 2018) p.3739 – 3743. Fassari, M. Gadella, M. L. Glasser, L. M. Nieto, F. Rinaldi “Level crossings of eigenvalues of the Schroedinger Hamiltonian of the isotropic harmonic oscillator perturbed by a central point interaction in different dimensions”, NANOSYSTEMS: PHYSICS, CHEMISTRY, MATHEMATICS, 2018, 9 (2), P. 179–186, https://doi.org/10.17586/2220-8054-2018-9-2-179-186 Iazeolla, E. Sezgin, P. Sundell, “On exact solutions and perturbative schemes in higher-spin theory”, in Universe 4 (2018) n.1, Special Issue on higher-spin gravity, p.45 Aros, C. Iazeolla, J. Norena, E. Sezgin, P. Sundell, Y. Yin, “FRW and domain walls in higher-spin gravity”, in JHEP 1803 (2018) 153, Dec. 2017, p.55 Meccanica e Processi Tecnologici 2024 N. Baldi, A. Giorgetti, A. Polidoro, M. Palladino, I. Giovannetti, G. Arcidiacono, P. Citti, “A Supervised Machine Learning Model for Regression to Predict Melt Pool Formation and Morphology in Laser Powder Bed Fusion”, Applied Sciences 2024, Vol. 14, Is. 1, Art. No. 328 2023 Baldi, A. Giorgetti, M. Palladino, I. Giovannetti, G. Arcidiacono, P. Citti P, “Study on the Effect of Preheating Temperature on Melt Pool Stability in Inconel 718 Components Processed by Laser Powder Bed Fusion” Metals 2023, Vol. 13, Is. 10, Art. No. 1792 Giorgetti, F. Rolli, V. La Battaglia, S. Marini, G. Arcidiacono, “Axiomatic Design Using Multi-criteria Decision Making for Material Selection in Mechanical Design: Application in Different Scenarios”, Proceedings of the 15th International Conference on Axiomatic Design, ICAD 2023 Eindhoven, 31 May – 2 June 2023, Lecture Notes in Networks and Systems (LNNS), Vol 849, Springer, pp. 135–148, 2024 Parretti, F. Rolli, R. Barbieri, G. Arcidiacono, P. Citti, “A Combined Axiomatic Design-MCDA Method for Selecting Medical Systems Operating on a Common Telemedicine Platform”, Proceedings of the 15th International Conference on Axiomatic Design, ICAD 2023 Eindhoven, 31 May-2 June 2023, Lecture Notes in Networks and Systems (LNNS), Vol 849, Springer, Pages 223 – 233, 2024. Speziali, A. Garinei, et al., “A Novel Approach to Face Early Pandemics Using QUBO Models,” 2023 IEEE International Conference on Quantum Computing and Engineering (QCE), Bellevue, WA, USA, 2023, pp. 266-267, doi: 10.1109/QCE57702.2023.10236. Lanza, A. Garinei, et al., “Gesture recognition for Healthcare 4.0: a machine learning approach to reduce clinical infection risks,” 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT), Brescia, Italy, 2023, pp. 326-331, doi: 10.1109/MetroInd4.0IoT57462.2023.10180128. Baldi N, Giorgetti A, Palladino M, Giovannetti I, Arcidiacono G, Citti P, 2023, “Study on the Effect of Inter-Layer Cooling Time on Porosity and Melt Pool in Inconel 718 Components Processed by Laser Powder Bed Fusion”, Materials 2023, 16 (11), 3920 Giorgetti A, Baldi N, Palladino M, Ceccanti F, Arcidiacono G, Citti P, 2023, “A Method to Optimize Parameters Development in L-PBF Based on Single and Multitracks Analysis: A Case Study on Inconel 718 Alloy”, Metals 2023, 13, 306 Risaliti E, Ferrara G, Romani L, Del Pero F, Arcidiacono G, Citti P, 2023, “Experimental investigation on the potential of passive prechambers for use in 2S Engines”, 52° Convegno Nazionale AIAS Baldi N, Giorgetti A, Palladino M, Arcidiacono G, Citti P, 2023, “Considerazioni sul Design termico di un componente metallico realizzato con tecnologia L-PBF: Inter-Layer Cooling Time, temperatura di preriscaldo e velocità del gas flow”, 52° Convegno Nazionale AIAS 2022 Giorgetti, A., Millefanti, U., La Battaglia, V., & Citti, P. (2022). Investigations of Fatigue Damage in a Nitriding Low-Carbon Bainitic Steel for High-Performance Crankshaft. Metals, 12(12), 2052. La Battaglia V, Giorgetti A, Marini S, Arcidiacono G, Citti P, 2022, “Kinematic Analysis of V-Belt CVT for Efficient System Development in Motorcycle Applications”, Machines 2022, 10, 16 2021 Arcidiacono G, 2021, Il miglioramento della produttività e il contenimento dei costi energetici: il Modello Piaggio, Edizione Piaggio Group, book Parretti, C., Pourabbas, E., Rolli, F., Pecoraro, F., Citti, P. (2021, August). Robust Privacy Assessment in Transnational Healthcare Systems. In IOP Conference Series: Materials Science and Engineering (Vol. 1174, No. 1, p. 012015). IOP Publishing. Citti P, Giorgetti A, Ceccanti F, Rolli F, Foith-Förster P, Brown CA (2021). “Design Representations”. In: Suh N.P., Cavique M., Foley J.T. (eds) Design Engineering and Science. Springer, Cham. https://doi.org/10.1007/978-3-030-49232-8_4, ISBN 978-3-030-49231-1 Ceccanti F, Giorgetti A, Arcidiacono G and Citti P (2021), “Laser Powder Bed Fusion: A Review on the Design Constraints,” IOP Conference Series: Materials Science and Engineering 1038 12065, https://doi.org/10.1088/1757-899X/1038/1/012065, ISSN: 1757-8981 Giorgetti S, Giorgetti A, Jahromi R T, Arcidiacono G, 2021, “Machinery foundations dynamical analysis: a case study on reciprocating compressor foundation”, Machines 2021, 9, 228 Arcidiacono G, Citti P, Giorgetti A, La Battaglia V, Marini S, 2021, “Sviluppo di approcci teorico sperimentali per il dimensionamento di trasmissioni CVT a cinghie trapezoidali”, 50° Convegno Nazionale AIAS Ceccanti F, Giorgetti A, Arcidiacono G, Citti P, 2021, “Laser Powder Bed Fusion: A Review on the Design Constraints”, IOP Conf. Ser.: Materials Science and Engineering 1038 12065, doi:10.1088 Citti P, Molinari P, Giorgetti A, Polidoro A, Pompei L, Arcidiacono G, 2021, “Design and validation of low-cost handling equipment for the use of Barkhausen Noise Testing in worm gears grinding burn detection”, IOP Conf. Ser.: Materials Science and Engineering 1038 012066, doi:10.1088 Dodun O, Slătineanu L, Arcidiacono G, Coteaţă M, Nagîţ G, Hriţuc A, 2021, “Selecting an alternative to solve a problem from several available alternatives”, IOP Conf. Ser.: Materials Science and Engineering 1009 012018 Nikiforova N.D., Berni R., Arcidiacono G., Cantone L., Placidoli P., “Latin hypercube designs based on strong orthogonal arrays and Kriging modelling to improve the payload distribution of trains”, Journal of Applied Statistics, Vol. 48, Is. 3, p. 498-516. 2020 Leccadito L., Parretti C. “Il lavoro che cambia: gli effetti della digitalizzazione sulla salute e la sicurezza nei luoghi di lavoro”. Bollettino ingegneri 7-8 2020 S. Piantini, A. Giorgetti, N. Baldanzini, C. Monti, M. Pierini, (2020), “Design of a motorcycle steering damper for a safer ride”, Machines, vol. 8, no. 2, pp 1-16. F. Ceccanti, A. Giorgetti, C. Cavallini, G. Arcidiacono, P. Citti, (2020) “Comparative evaluation of fuzzy axiomatic design and IAMS comprehensive VIKOR approaches for material selection in mechanical design”, International Journal of Engineering Research and Technology, vol. 13, no. 1, pp. 80-87. Girgenti A., Giorgetti A., Rolli F., Arcidiacono G., Sgrevi A., Citti, P. (2020), “The importance of metrics for the evaluation of design performance for an axiomatic design system development”, International Journal of Scientific and Technology Research, vol. 9, no. 3, pp. 4793-4798. 2019 Scarpino P.A., Parretti C., Scarpino F. “Valutare il rischio da archi elettrici e radiazioni in AC”, AEIT numero 9/10 (2019). Rolli F., Pecoraro, Luzi, Ricci, E. Pourabbas, C. Parretti, “Clinical risk evaluation of medical device software: an axiomatic design-based methodology”, MATEC Web of Conferences 301, 00005 (2019). doi: 10.1051/matecconf/201930100005 Parretti C., Pourabbas E., Rolli F., Pecoraro F., Citti P., Giorgetti A., “Robust design of web services supporting the home administration of drug infusion in pediatric oncology”, MATEC Web of Conferences 301, 00013 (2019), doi: 10.1051/matecconf/201930100013 Cappelli, A., Parretti, C., Cini, E., & Citti, P. (2019). Development of a new washing machine in olive oil extraction plant: A first application of usability-based approach. Journal of Agricultural Engineering, 50(3), 134-142. doi: 10.4081/jae.2019.949 F. Ceccanti, A. Giorgetti, P. Citti, (2019), “A Support Structure Design Strategy for Laser Powder Bed Fused Parts”, Procedia Structural Integrity, 24, pp. 667-679. A. Giorgetti, F. Ceccanti, P. Citti, A. Ciappi, G. Arcidiacono, (2019), “Axiomatic Design of Test Artifact for Laser Powder Bed Fusion Machine Capability Assessment”, Proceedings of 13th International Conference on Axiomatic Design, Sydney (Australia), doi: 10.1051/matecconf/201930100006 M. Mariottini, N. Pieroni, P. Bertini, B. Pacifici, A. Giorgetti. (2019), “Wheel box test aeromechanical verification of new first stage bucket with integrated cover plates for MS5002 GT”. In Proceedings of the ASME Turbo Expo, 9 doi:10.1115/GT2019-90075 A. Ciappi, A. Giorgetti, F. Ceccanti, G. Canegallo. (2019), “Technological and economical consideration for turbine blade tip restoration through metal deposition technologies”. Proc. Inst. Mech. Eng. Part. C J Mech Eng Sci, doi:10.1177/0954406219888245 Cantone L, Arcidiacono G, 2019, “Numerical model for distributors of railway vehicles equipped with composite blocks”, Procedia Structural Integrity 24, pp. 820-828 2018 Parretti, C., Rolli, F., Pourabbas, E., Citti, P. Axiomatic Selection of Health and Social Care Web Services on the Basis of Use Cases. (2018). In MATEC Web of Conferences (Vol. 223, p. 01013). EDP Sciences., doi: 10.1051/matecconf/201822301013 A. Giorgetti, G. Arcidiacono, A. Ciappi, R. Barbieri, P. Citti, (2018), “HNCR model following robust approach”, Quality and Reliability Engineering International; DOI: 10.1002/qre.2324; C. Monti, A. Giorgetti, L. Tognarelli, F. Mastromatteo, (2018) “Effects of Multiple Rejuvenation Cycles on Mechanical Properties and Microstructure of IN-738 Superalloy”, Journal of Material Engineering and Performance, vol.27: 2524-2533. DOI: 10.1007/s11665-018-3335-5; P. Citti, A. Giorgetti, U. Millefanti, (2018), “Mechanical characterization of a new low carbon bainitic steel for high performance crankshaft”, Procedia Structural Integrity Vol.8, pp. 486-500, doi:10.1016/j.prostr.2017.12.048 G. Arcidiacono, B. Innocenti, A. Macrì, A. Giorgetti, (2018), “Design of a measurement system for the estimation of the knee kinematics”, International Journal of Mechanical Engineering and Technology, 9 (2): p.866-875; E. Giusti, A. Giorgetti, A. Girgenti, G. Arcidiacono, D. Checcacci, W. Schiavi, (2018), “New empirical design practice to evaluate the sealing capability of split flange for steam turbine”, International Journal of Mechanical Engineering and Technology 9(2): p.839-850; Cantone L, Arcidiacono G, Placidoli P, 2018, “Autonomous Determination of Pneumatic Parameters of Traindy”, International Journal of Mechanical Engineering and Technology, Vol. 9, Issue 9, pp. 1507–1515 Arcidiacono G, Placidoli P, 2018, “Material model calibration and validation for laminated composites using kriging surrogate models”, International Journal of Mechanical Engineering and Technology, Vol. 9, Issue 3, pp. 1107-1121 Cantone L, Arcidiacono G, 2018, “A study on releasing manoeuvre to improve freight safety and efficiency”, International Journal of Mechanical Engineering and Technology, Vol. 9, Issue 3, pp. 899-909 Arcidiacono G, Berni R, Cantone L, Nikiforova ND, Placidoli P, 2018, “Fast Method to Evaluate Payload Effect on In-Train Forces of Freight Trains”, The Open Transportation Journal, 2018, 12, pp. 77-87, DOI: 10.2174/1874447801812010077 Arcidiacono G, Placidoli P, Cantone L, 2018, “Automatic Identification of Tuning Parameters of Brake Pipe Pneumatic Model”, International Journal of Mechanical Engineering and Technology, Vol. 9, Issue 2, pp. 829-838 Arcidiacono G, Cantone L, 2018, “A Model of Control Valve for Wagons Equipped by k-Blocks”, International Journal on Advanced Science, Engineering and Information Technology, Vol. 8, Issue 1, pp. 285-290, DOI:10.18517/ijaseit.8.1.4974 Rolli F, Fradinho J, Giorgetti A, Citti P, Arcidiacono G, 2018, “Axiomatic decomposition of a zero-sum game: the penalty shoot-out case”, Proceedings of 12th International Conference on Axiomatic Design, Reykjavik (Islanda). MATEC Web of Conferences Vol. 223, article id. 01005 Arcidiacono G, Berni R, Cantone L, Nikiforova ND, Placidoli P, 2018, “A Kriging modeling approach applied to the railways case”, Procedia Structural Integrity 8, pp. 163-167 Arcidiacono G, Berni R, Bonora N, Catelani M, Pierini M, 2018, “Interuniversity Research Center StEering – Statistics for Engineering: Design, Quality and Reliability”, Procedia Structural Integrity 8, pp. 168-173 Cannella F., Garinei A., Marsili R., Speranzini E. (2018), “Dynamic mechanical analysis and thermoelasticity for investigating composite structural elements made with additive manufacturing”, Composite Structures, doi: https://doi.org/10.1016/j.compstruct.2017.11.029 Scappaticci L., Castellani F., Astolfi D., Garinei A. (2018), “Diagnosis of vortex induced vibration of a gravity damper”, Diagnostyka, vol. Vol. 19, No. 2, doi: 10.29354/diag/86415 Processi gestionali 2023 Candido, F. Cascini, P. Lachman, V. Valentini, R. Tartaglia. “Effects of the Italian Law on Patient Safety and Health Professional Responsibilities Five Years after Its Approval by the Italian Parliament”. Healthcare 2023, 11, 1858. https://doi.org/10.3390/healthcare11131858 IF 3,16; Candido, C. Tortù, C. Seghieri, R. Tartaglia, C. Baglioni, P. Citti, I. Marina Raciti, M. La Regina, S. Simonini, M. Urbani, C. Parretti, P. Barach. “Physical and Stressful Psychological Impacts of Prolonged Personal Protective Equipment Use During the COVID-19 pandemic: A Cross-Sectional Survey Study”, J Infect Public Health. 2023 Jun 5;16(8):1281-1289. doi: 10.1016/j.jiph.2023.05.039. Online ahead of print. IF 7.53 Poli, D., Tartaglia, R., Barcellona, D., Bucciarelli, P., Ciampa, A., Grandone, E., Malcangi, G., Rescigno, G., Toschi, V., Testa, S., & Squizzato, A. (2023). Attitude to clinical research among health professionals affiliated with the Italian Federation of Centers for the Diagnosis of Thrombotic Disorders and the Surveillance of the Antithrombotic Therapies (FCSA). Bleeding, Thrombosis, and Vascular Biology, 2(1). https://doi.org/10.4081/btvb.2023.59 2022 La Battaglia V, Giorgetti A, Marini S, Arcidiacono G, Citti P, 2022, “Rapporto di trasmissione teorico e reale nelle trasmissioni CVT a cinghie trapezoidali: analisi cinematica e sperimentale”, 51° Convegno Nazionale AIAS. Parretti, G. Candido, M. La Regina, C. Tortu, R. Tartaglia, “Telemedicine in Italy, the starting point”, Internal and Emergency Medicine 2022 Dec. 6th, https://doi.org/10.1007/s11739-022-03176-6 Parretti C, Tartaglia R, La Regina M, Venneri F, Sbrana G, Mandò M, Barach P., “Improved FMEA Methods for Proactive Health Care Risk Assessment of the Effectiveness and Efficiency of COVID-19 Remote Patient Telemonitoring”, Am J Medical Quality, October 2022 doi 10.197/JMQ 0000000000000089 Balestracci B, La Regina M, Di Sessa D et Al Tartaglia R. “Patient safety implications of wearing a face mask for prevention in the era of COVID-19 pandemic: a systematic review and consensus recommendations”, Internal and Emergency Medicine, September 2022, DOI 1007/s11739-022-03083-w La Regina M, Mancini A, Falli F, Fineschi V, Ramacciati N, Frati P, Tartaglia R. “Aggressions on Social Networks: What Are the Implications for Healthcare Providers? An Exploratory Research”, Healthcare (Basel). 2021 Jun 28;9(7):811. doi: 10.3390/healthcare9070811.PMID: 34203141 Rossi, “Religiosità e Corporate Financial Decisions”, ed. Aracne, jun 2022. Lachman, M. La Regina, R. Tartaglia, “Safety in a pandemic”, in Oxford Professional Practice. Handbook of Patient Safety. Edited by Peter Lachman, Jane Runnacles, Anita Jayadev, John Brennan, and John Fitzsimons. Oxford University Press, February 2022. Bocchi, F. Cascini, R. Tartaglia, “Gestione del rischio e responsabilità sanitaria nelle residenze sanitarie assistenziali”, in “Responsabilità, Rischio e Danno in Sanità”. Editors F. Gelli, M. Hazan, D. Zorzit e F. Cascini. Giuffré Milano 2022. Candido, P. Citti, R. Tartaglia, “Valutazione dei dispositivi di protezione personale (DPI) delle vie respiratorie: rassegna della letteratura”, Italian Journal of Prevention, Diagnostic and Therapeutic Medicine 2021, vol. 4 n. 3: 25-33. 2021 La Regina, M. Tanzini, F. Orlandini, E. Cantinotti, R. Tartaglia, “Medical wards, the worst of the class for ‘never events’: considerations and actions”, Int. and Emergency Medicine 2021 Feb. 8 https://DOI.org/10.1007/s111739-021-02657-4 Seghieri C., La Regina M., Tanzini M., Tartaglia R, “Looking for the right balance between human and economic costs during COVID-19 Outbreak”, Int Journal Quality in Health Care, 2021, Feb. 20; 33(1)21 Doi:10.1093/intqhv/mzaa155 Tartaglia, M. La Regina, M. Tanzini, C. Pomare, R. Urwin, L. A. Ellis, V. Fineschi, F. Venneri, C. Seghieri, P. Lachman, J. Westbrook, J. Braithwaite, “COVID-19 Pandemic: International Survey of Management Strategies”, Int. Journal Quality Health Care. 2021 Feb 20; 33(1):mzaa139. doi: 10.1093/intqhc/mzaa139. Scopetti M, Santurro A, Tartaglia R, Frati P, Fineschi V., “Expanding frontiers of risk management: care safety in nursing home during COVID-19 pandemic”, Int Journal Quality Health Care. 2021 Mar 5; Vol. 33, Is. 1, mzaa085. doi: 10.1093/intqhc/mzaa085 Donaldson, W Ricciardi, S Sheridan, R Tartaglia (Eds) Textbook of patient safety and clinical risk management. Springer 2021 Open access https://link.springer.com/book/10.1007%2F978-3-030-59403-9 Toccafondi, G. Dagliana, V. Fineschi, P. Frati, R. Tartaglia, “Proactive Risk Assessment through FMEA of Home Parenteral Nutrition Care Processes: A Survey Analysis”, Current Pharmaceutical Biotechnology, Vol. 22, Is. 3, 2021, doi: 10.2174/1389201021666200612171943 La Regina, M. Tanzini, V. Fineschi, F. Venneri, G. Toccafondi, P. Lachman, R. Tartaglia, “Responding to COVID-19: the experience from Italy and recommendations for management and prevention”, Int. Journal Quality in Health Care, Vol. 33, Is. 1, 2021, mzaa057, https://doi.org/10.1093/intqhc/mzaa057 2020 Witczak, I. Uchmanowicz, R. Tartaglia, L. Rypicz, “Safety Assessment of the Pharmacotherapy Process at the Nurse and Midwife Level – An Observational Study”, Therapeutics and Clinical Risk Management 2020; 16:1057-1065. Tartaglia, S. Prineas, D. Poli, S. Albolino, T. Bellandi, G. Biancofiore, G. Bertolini, G. Toccafondi, “Safety Analysis of 13 Suspicious Deaths in Intensive Care. Ergonomics and Forensic Approach Compared”, Journal of Patient Safety: Mar. 11, 2020, doi: 10.1097/PTS.0000000000000666 Bellieni, M. Benvenuti, B. Bonvicini, T. Candelori, D. Capano, P. Costigliola, F. Franchi, G. Gualtieri, R. Gusinu, M. La Regina, I. Mercurio, M. Montisci, G. Nucci, C. Pergolizzi, E. Romano, S. Scolletta, M. Tanzini, R. Tartaglia, C. Terranova, F. Venneri, G. Viel. La responsabilità medica: cosa cambia dall’emergenza sanitaria. Maggioli editore, 2020 2019 Arcidiacono G., “L’integrazione Process & Human Excellence come valorizzare le risorse umane e gli ambienti di lavoro”, Edizione Piaggio Group, 2019. Albolino, T. Bellandi, S. Cappelletti, M. Di Paolo, V. Fineschi, P. Frati, C. Offidani, M. Tanzini, R. Tartaglia, E. Turillazzi, “New Rules on Patient’s Safety and Professional Liability for the Italian Health Service”, Current Pharm. Biotechnology, Vol. 20, Is. 8, 2019, doi: 10.2174/1389201020666190408094016 La Regina, M., Guarneri, F., Romano, E., R. Tartaglia et al. “What Quality and Safety of Care for Patients Admitted to Clinically Inappropriate Wards: a Systematic Review”, J. Gen. Intern Med. 34, 1314–1321 (2019). https://doi.org/10.1007/s11606-019-05008-4 2018 Arcidiacono G, Pieroni A, “The Revolution Lean Six Sigma 4.0”, International Journal on Advanced Science, Engineering and Information Technology, Vol. 8, Issue 1, 2018, pp. 141-149, DOI:10.18517/ijaseit.8.1.4593 Matt DT, Arcidiacono G, Rauch E, “Applying Lean to Healthcare Delivery Processes – a Case-based Research”, International Journal on Advanced Science, Engineering and Information Technology, Vol. 8 Issue 1, 2018, p. 123-133, DOI:10.18517/ijaseit.8.1.4965 Toccafondi, F. Balboni, M. Gallo, M. G. Colao, G. Mazzarelli, M. Tanzini, G. Dagliana, R. Tartaglia, G. Lippi, “Interruptions, work environment and work load perceptions in laboratory medicine: patient safety is a ‘moving target’”, De Gruyter, Sep 25 2018, Vol. 5, Is. 3, p.167-169, doi: https://doi.org/10.1515/dx-2018-0032 Scapellato, F. Balboni, M. Quercioli, P. Pezzati, G. Toccafondi, P. Casprini, A. Aita, R. Guerranti, M. Fiorini, G. Fuzzi, A. Tomei, R. Tartaglia, “Misidentification in laboratory medicine: results of the Tuscany survey of the Clinical Risk Management Study Group SIBioC and the Italian Society of Ergonomy (SIE)”, Biochimica Clinica 2018; Vol. 42, Is. 2, p.141-145, doi: 10.19186/BC_2018.029 Piva, F. Balboni, R. Tartaglia et al. “Recommendations for the detection and management of critical results in clinical laboratories”, Biochimica Clinica 2018; Vol. 42, Is. 2, p. 167-179, doi: 10.19186/BC_2018.015 Patone Cotrim, F. Serranheira, P. Sousa, S. Hignett, S. Albolino, R. (editors). Health and Social Care System of the Future: Demographic Changes, Digital Age and Human Factors. Proceedings of the Healthcare Ergonomics and Patient Safety HEPS 3- 5 July, 2019 Lisbon, Portugal. Bagnara, R. Tartaglia, S. Albolino, A. Thomas, F. Yushi Fujita (Eds). Proc. 20th Congress of the Int. Ergonomics Association (IEA 2018). Vol. 1-10 Springer 2018. Sostenibilità, Ambiente e Territorio 2023 Poeta, S. Costarelli, A. Monacelli, E. Lasagna, R. Franceschini, M. L. Marenzoni, “Need for the implementation of biosecurity in animal farming “, In Atti del XXIII Congresso Nazionale CIRIAF Sviluppo Sostenibile, Tutela dell’Ambiente e della Salute Umana Perugia, 13-14 aprile 2023 ISBN (online PDF) 978-88-9392-442-9 Roila, A. Piersanti, A. Valiani, D. Ranucci, T. Tavoloni, A. Stramenga, F. Griffoni, L. Pittura, S. Gorbi, R. Franceschini, F. Agnetti, G. Palma, R. Branciari “Carassius auratus as a bioindicator of the health status of Lake Trasimeno and risk assessment for consumers”, Ital. Jour. Food Saf, Jul. 2023 doi:10.4081/ijfs.2023.11137 2022 Bianchi F., Speziali S., Marini A., Proietti M., Menculini L., Garinei A, Bellani G., Marconi M. (2022). “Real-Time Oil Leakage Detection on Aftermarket Motorcycle Damping System with Convolutional Neural Networks”, SENSORS, ISSN: 1424-8220, doi: 10.3390/s22207951 Giulietti, G. Allevi, P. Castellini, A. Garinei, M. Martarelli (2022). “Rivers’ Water Level Assessment Using UAV Photogrammetry and RANSAC Method and the Analysis of Sensitivity to Uncertainty”, SENSORS, ISSN: 1424-8220, doi: https://doi.org/10.3390/s22145319 F. Termite, E. Bonamente, A. Garinei, D. Bolpagni, L. Menculini, M. Marconi, L. Biondi, A. Chini, M. Crespi (2022) “A Decision Support System Based on Rainfall Nowcasting and Artificial Neural Networks to Mitigate Wastewater Treatment Plant Downstream Floods” In: Klein, C., Jarke, M., Helfert, M., Berns, K., Gusikhin, O. (eds) Smart Cities, Green Technologies, and Intelligent Transport Systems. VEHITS SMARTGREENS 2021. Communications in Computer and Information Science, vol 1612. Springer, Cham. https://doi.org/10.1007/978-3-031-17098-0_7. Marini, P. Mariani, A. Garinei, S. Proietti, P. Sdringola, M. Proietti, L. Menculini, M. Marconi (2022), “Designing Air Quality Monitoring Systems in Smart Cities”, In: Klein, C., Jarke, M., Helfert, M., Berns, K., Gusikhin, O. (eds) Smart Cities, Green Technologies, and Intelligent Transport Systems. VEHITS SMARTGREENS 2021 2021. Communications in Computer and Information Science, vol 1612. Springer, Cham. https://doi.org/10.1007/978-3-031-17098-0_1. Proietti, A. Garinei, M. Marconi, et al., “Non-invasive measurements for characterization of Hermetia Illucens (BSF) life cycle in rearing plant”, 2022 IEEE Workshop on Metrology for Agriculture and Forestry (MetroAgriFor), 2022, pp. 223-228, doi: 10.1109/MetroAgriFor55389.2022.9964687. Mangeruca, A. Garinei, M. Marconi, et al., “Snow water equivalent (SWE) measurements for better management of water resources to reduce drought risk” 2022 IEEE Workshop on Metrology for Agriculture and Forestry (MetroAgriFor), 2022, pp. 307-312, doi: 10.1109/MetroAgriFor55389.2022.9964489. Naselli F, Pali M, Bellone C, Andreassi F (2022). “Morphology of city layers as a resource for an urban tourism offer. an integrated research tourism vision for Tirana”. SCIRES-IT, vol. 12, p. 165-176, ISSN: 2239-4303 Naselli F, Bellone C, Pali M, Andreassi F (2022). “Tirana as an Open Lab: A Pilot for an Integrated Research Tourism Vision Pre-Post-Pandemic”. International Journal of E-Planning Research, vol. 11, p. 1-18, ISSN: 2160-9926 Franceschini R, Guardone L, Armani A, Ranucci D, Roila R, Valiani A, Susini F, Branciari R (2022), “Five-years management of an emerging parasite risk (Eustrongylides sp., Nematoda) in a fishery supply chain located on Trasimeno Lake (Italy)”, Food Control, Vol 136, 108858, ISSN: 0956-7135, https://doi.org/10.1016/j.foodcont.2022.108858 Bellone C. (2022). Prefazione. In: Andreassi F. Progetti per L’Aquila. Il quadro conoscitivo verso una trasformazione urbana consapevole. METODI DEL TERRITORIO, p. 11-13, FRANCO ANGELI, ISBN: 978-88-351-1839-8 Carci P.L. (2022). Introduzione. In: Andreassi F. Progetti per L’Aquila. Il quadro conoscitivo verso una trasformazione urbana consapevole. METODI DEL TERRITORIO, p. 11-13, FRANCO ANGELI, ISBN: 978-88-351-1839-8 Bellone C., Nerantzia J, Musacchio R, Manaridou V (2022). New theoretical models and governance for territorial complexity. In: (a cura di): Camiz A, Geffes I, Charalambous N, Cities as assemblages Proceedings of the XXVI international seminar on Uban form 2019. vol. 2, p. 63-76, roma: tab edizioni, ISBN: 978-88- 9295-329-1 Bellone C, Carci P.L. Colonna A. (2022). PANDEMIC AND URBAN PLANNING – EVALUATIONS AND REFLECTIONS ON THE RESILIENCE OF MUNICIPAL URBAN PLANNING TOOLS IN THE CALABRIA REGION. In: (a cura di): Yunitsyna A, Naselli F, Manahasa E,Toska A, Lloshi M, Bila O, 4rth International Conference on Architecture and Urban Design NEW & OLD NORMALITY POST 2020 4-ICAUD ABSTRACT BOOK . Tirana: Department of Architecture Epoka University Tirana, Albania, ISBN: 978-9928-135-38-4, Tirana, 24-26 nov. 2021 Andreassi F, Bellone C (2022). URBAN PLAN, SMART CITY AND EMERGENCIES: THE DIFFICULT RELATIONSHIP. THE CASE STUDY OF L’AQUILA. In: (a cura di): Yunitsyna A, Naselli F, Manahasa E, Toska A, Lloshi M, Bila O, Abstract Book of the FOURTH INTERNATIONAL CONFERENCE ON ARCHITECTURE AND URBAN DESIGN NEW & OLD NORMALITY POST 2022. Tirana: Department of Architecture, Epoka University, ISBN: 978- 9928-135-38-4, Tirana, 24-26 nov. 2021 2021 Bellone C, Naselli F, Andreassi F (2021). New Governance Path through Digital Platforms and the Old Urban Planning Process in Italy. SUSTAINABILITY, vol. (rivista di fascia A) 13, p. 1-11, ISSN: 2071-1050, org/10.3390/su13126911 Bellone C., Andreassi F., Naselli F. (2021) How digital is affecting urban transformation. In Thomas J.J. et others (eds) Smart Cities and Machine Learning in Urban Health, IGI Global, Hershey. ISBN: 9781799871767 DOI: 10.4018/978-1-7998-7176-7 Book link https://www.igi-global.com/book/smart-cities-machine-learning-urban/261124?f=hardcover-e-book Andreassi F., Bellone C., Naselli F. (2021) Between Crisis and In-Settlement-Speeding-Up: The Case of L’Aquila. In La Rosa D., Privitera R. (eds) Innovation in Urban and Regional Planning. Proceedings of the 11th INPUT Conference, Volume 1, Lecture Notes in Civil Engineering series Springer, Cham. https://www.springer.com/series/15087 Bellone C., Andreassi F., Naselli F., Ranucci P. (2021) Territorial planning, smart cities, and new governance. In: Proceedings of Sixth International Congress on Information and Communication Technology, ICICT 2021, Volume 3. Pag 253-260 Lecture Notes in Networks and Systems book series, Springer, p.198, Cham. Book link https://link.springer.com/book/10.1007/978-981-16-1781-2 Blois, L., Lay-Ekuakille, A. “Environmental impacts from atmospheric emission of heavy metals: A case study of a cement plant”, (2021) Measurement: Sensors Journal of the International Measurement Confederation (IMEKO). Vol. 18, December 2021, art. no. 100313. Roila, R. Branciari, D. Ranucci, A. Stramenga, T. Tavoloni, T. Stecconi, R. Franceschini, A. Piersanti, (2021) “Risk Characterization and Benefit–Risk Assessment of Brominated Flame Retardant in Commercially Exploited Freshwater Fishes and Crayfish of Lake Trasimeno, Italy”, International Journal of Environmental Research and Public Health, 18(16), 8763; ISSN: 1660-4601, doi: https://doi.org/10.3390/ijerph18168763 Bellone C (2021). I Prati del Popolo Romano. La partecipazione come sperimentazione per il progetto dello spazio urbano, con scritti di F. Andreassi, C. Bellone, A.Colonna, P. Trevisani. ISBN: 978-88-351-1080-4 Carci P.L., Prefazione in Bellone C (2021). I Prati del Popolo Romano. La partecipazione come sperimentazione per il progetto dello spazio urbano. ISBN: 978-88-351-1080-4 Ottavi R, Bellone C (2021). “Linee guida per un piano regolatore dell’illuminazione urbana innovativo e di qualità”. In: aavv. (a cura di): aavv, Innovazione e nuovi strumenti per la progettazione illuminotecnica e degli apparecchi con tecnologia led. vol. 3, p. 192-206, MILANO: Editoriale Delfino, ISBN: 978-88—31221-67-2, Napoli, 19-20 ottobre 2020 Bellone, F. Naselli, F. Andreassi, “New Governance Path through Digital Platforms and the Old Urban Planning Process in Italy”, Sustainability 2021, 13, 6911. https://doi.org/10.3390/su13126911 Bellone, R. Ottavi, (2021) “The Lighting Plan: From a Sector-Specific Urbanistic Instrument to an Opportunity of Enhancement of the Urban Space for Improving Quality of Life”, Intelligent Computing and Optimization. ICO 2020. Advances in Intelligent Systems and Computing, vol 1324. Springer, Cham. https://doi.org/10.1007/978-3-030-68154-898 Bellone, A. Fiduccia, F. Naselli, (2021) “The ‘complex redevelopment’ of a contemporary river-city”, Downscaling, Rightsizing. Contrazione demografica e riorganizzazione V. 07 Il ritorno delle foreste e della natura, il territorio, Planum Publisher e Società Italiana degli Urbanisti, ISBN 978-88-99237-34-9 DOI 10.53143/PLM.C.721 2020 Andreassi, C. Bellone, “Pratiche di marketing di un nuovo colonialismo nella pianificazione: il ruolo della smart city”. URBANISTICA INFORMAZIONI, vol. 292, 2020, 0392-5005 (rivista stampa) ISSN: 2239-4222 (rivista online) Bellone, P. Trevisani, “Dal Processo partecipativo al Progetto Urbano. Il rione testaccio (Roma)”. URBANISTICA INFORMAZIONI, vol. 292, 2020, 0392-5005 (rivista stampa) ISSN: 2239-4222 (rivista online) Branciari, R. Franceschini, R. Roila, A. Valiani, I. Pecorelli, A. Piersanti, N. Haouet, M. Framboas, D. Ranucci, “Nutritional value and contaminant risk assessment of some commercially important fishes and crawfish of Lake Trasimeno, Italy”, Int. journal of environmental research and public health 17 (7), 2545 2020/1 L. Marenzoni, M. B. Conti, E. Rossi, R. Rinoldo, R. Franceschini, E. Tesei, F. Porciello, S. Mancini, B. Favi, M. Gamboni, P. Boni, O. Raffaele, C. Desario, M. P. Franciosini, C. Buonavoglia, N. Decaro, “Detection of environmental contamination with feline and canine parvoviruses: new perspectives and challenges”, Journal of Applied Microbiology 2020/12/16 Bellone C., Trevisani P., Colonna A. (2020). “Piazza Testaccio: esperienza di partecipazione nel recupero di uno spazio urbano nel centro storico di Roma”, ARCHIVIO DI STUDI URBANI E REGIONALI, vol. 128, p. 64-79, ISSN: 1971-8519 and ISSN: 0004-0177 Bellone C., Andreassi F. (2020). “Evolution of a seismic medieval city. The case of L’Aquila”, Sustainable Mediterranean Construction, vol. 4/2020, p. 11-13, ISSN: 2420-8213 Andreassi F, Bellone C (2020). “Tra smart city e smart landscape”, URBANISTICA INFORMAZIONI, vol. 289, ISSN: 0392-5005 and ISSN: 2239-4222 Bellone C., Andreassi F. (2020). “Evolution of a Seismic Medieval City. The case of L’Aquila”. In: Gerundo C, Stanganelli M. Landscape at risk. vol. 4/2020, ISBN: 978-88-6026-279-0 Bellone C. (2020). “L’Aquila: una città sospesa”. In: Andreassi F. La ricostruzione di L’Aquila. 2020, p. 9-12, MILANO: FrancoAngeli, ISBN: 978-88-917-9086-6 Bellone C., Naselli F., Fiduccia A. (2020). “Riverfront regeneration and environmental recovery into the contemporary city”. In: SIU, Downscaling, rightsizing contrazione demografica e riorganizzazione spaziale, XXIII Conferenza Nazionale SIU. Torino, 17-18 giugno 2021 Lay-Ekuakille, A., Blois, L., Velazquez, R., “Design of high efficiency polymer probe for geothermal energy transmission and measurement”, Measurement: Journal of the International Measurement Confederation, 2020, 152. Bonamente E, Termite LF, Garinei A, Biondi L, Rossi G (2020), “Run-time optimisation of sewer remote control systems using genetic algorithms and multi-criteria decision analysis: CSO and energy consumption reduction”, Civil Engineering and Environmental Systems, ISSN: 1028-6608, doi: https://doi.org/10.1080/10286608.2020.1771701 2019 Biagiotti S., De Lorenzis I., Di Matteo U., Joime G. (2019). “Agricoltura sostenibile. Sviluppo locale e sfide globali”, ROMA Aracne, ISBN: 8825526024 Saviano M., Barile S., Farioli F., Orecchini F., “Strengthening the science–policy–industry interface for progressing toward sustainability: a systems thinking view”, Sustainability Science, 2019, 14(6), pp. 1549–1564 Branciari, R. Roila, A. Valiani, D. Ranucci, R. Ortenzi, D. Miraglia, L. Bailetti, R. Franceschini, “Nutritional quality, safety and sensory properties of smoked tench (Tinca tinca) pâté from Trasimeno Lake, Italy”, Italian journal of food safety 8 (3) 2019/9/30 L. Carci, C. Bellone, A. Colonna, “The Structural Planning of The Municipality of Diamante”, In: AA.VV. Next Places, Next Spaces Forthcoming approaches in architectural and urban designing, 2019, p. 285-297, Tirana, Albania: Epoka University, ISBN: 978-9928-135-33-9 Bellone C., Georgi J., Musacchio R.C. (2019). “New theoretical models and governance for territorial complexity”. In: AAVV. ISUF NICOSIA 2019: XXVI International Seminar on Urban Form Cities as Assemblages. Nicosia: ISUF NIXOSIA, NICOSIA, 2-6 Jul 2019 Bellone C., Trevisani P., Colonna A. (2019). “Il processo partecipativo per l’ex campo di calcio della Roma nel rione Testaccio”, Urbanistica Informazioni, vol. 283, p. 65-67, ISSN: 0392-5005 and ISSN: 2239-4222 Bellone C, Naselli F. (2019). “Inter-generational exchanges. The meaning of an integrated sustainable process for inland areas’ development based on vernacular knowledge”, FORMAMENTE, vol. 2, ISSN: 1970-7118 and 2284-4600 Andreassi F., Bellone C. (2019). “Strumenti digitali e governance emergenziale del territorio post sisma”, Urbanistica Informazioni, vol. 287-288, p. 112-115, ISSN: 0392-5005 and ISSN: 0004-0177 Bellone C. (2019). “I trulli, identità di un territorio”. In: Marzulli M. Trulli. meravigliose architetture nel contesto dei muri a secco. p. 7-10, Martina Franca (TA): Artebaria edizioni, ISBN: 9788896711767 Bellone C., Trevisani P., Colonna A. (2019). “The Partecipation Role of Citizens in ‘Piazza Testaccio’ Regeneration Project in Rome Historical City Center”. In: Ruggiero C, Arslan H, Gianturco G. Contemporary Approaches in Social Science Researches. p. 283-286, Bialystok, Poland: E-BWN, ISBN: 978-83-953142-1-6 Bonamente E, Brunelli C, Castellani F, Garinei A, Biondi L, Marconi M, Piccioni E (2019), “A life-cycle approach for multi-objective optimisation in building design: methodology and application to a case study”, Civil Engineering and Environmental Systems, ISSN: 1028-6608, doi: https://doi.org/10.1080/10286608.2019.1576646 Garinei A, Marini A, Piccioni E, Marconi M, Biondi L, Bertolini A, Ferrari G (2019), “Analysis of the effects of uncertainties on agrometeorological models”, IOP Conference Series. Earth and Environmental Science, ISSN: 1755-1315 Termite L., Garinei A., Marini A., Marconi M., Biondi L. (2019), “Combining satellite data and Machine Learning techniques for irrigation Decision Support Systems”, IOP Conference Series. Earth and Environmental Science, ISSN: 1755-1315, doi: 10.1109/MetroAgriFor.2019.8909279 Garinei A, Marini A, Piccioni E, Marconi M, Biondi L, Bertolini A, Ferrari G (2019), “Analysis of the effects of uncertainties on agrometeorological models”, IOP Conference Series. Earth and Environmental Science, ISSN: 1755-1315, doi: 10.1088/1755-1315/275/1/012012 2018 Blois, L., Lay-Ekuakille, A. “Reliability and Metrology Features for Manufacturing Process of Nanoelements for Geo-Environmental Protection” 2018 Nanotechnology for Instrumentation and Measurement, NANOfIM 2018 Lay-Ekuakille, A., Giannoccaro, N.I., Blois, L., Kalonga, V., Kapita, P. “NEMS Devices for Actuators to Control Nano-Urea Flow: Environmental and Biomedical Challenges” 2018 Nanotechnology for Instrumentation and Measurement, NANOfIM 2018 Barile S., Orecchini F., Saviano M., Farioli F., “People, technology, and governance for sustainability: the contribution of systems and cyber-systemic thinking”, Sustainability Science, 2018, 13(5), pp. 1197–1208 L. Carci, C. Bellone, S. Savoia, “A possible tool for the territory regeneration Organization and digitalization of the building process through BIM”, FORMAMENTE vol. 3-4/2018, p. 35-50, ISSN: 2284-4600 and ISSN: 1970-7118, 2018 Bellone C., Ranucci P., Geropanta V. (2018). “The ‘Governance’ for Smart City Strategies and Territorial Planning”. In: Pandian Vasant Ivan Zelinka Gerhard-WilhelmWeberIntelligent Computing & Optimization, Intelligent Computing & Optimization. ADVANCES IN INTELLIGENT SYSTEMS AND COMPUTING, vol. 866, p. 76-86, Springer, ISBN: 978-3-030-00978-6, ISSN: 2194-5357 Bellone C., Geropanta V. (2018). “The ‘Smart’ as a Project for the City Smart Technologies for Territorial Management Planning Strategies”. In Pandian Vasant Ivan Zelinka Gerhard-WilhelmWeber Editors, Intelligent Computing & Optimization. ADVANCES IN INTELLIGENT SYSTEMS AND COMPUTING, vol. 866, p. 66-75, Springer, ISBN: 978-3-030-00978-6, ISSN: 2194-5357 Bellone C., Trevisani P., Colonna A. (2018). “Il recupero urbano attraverso esperienze di ‘partecipazione’: piazza Testaccio a Roma”. URBANISTICA INFORMAZIONI, vol. 278-279, p. 82-85, ISSN: 0392-5005 Bellone C., Geropanta V., Kushi M. (2018). “Sustainable development and territorial regeneration in archaeological areas The case of Apollonia in Albania”, FORMAMENTE, vol. 1-2/2018, p. 53-74, ISSN: 2284-4600 and ISSN: 1970-7118 Blois L., Giannoccaro N. I., Lay-Ekuakille A., Kalonga V., Kapita P. (2018). “NEMS Devices for Actuators to Control Nano-Urea Flow: Environmental and Biomedical Challenges”, In IEEE Nanotechnology for Instrumentation and Measurement (NANO IM) 2018, p. 1-3, Mexico City, Mexico, 7-8 Nov. 2018, doi: 10.1109/NANOFIM.2018.8688620 Blois L., Lay-Ekuakille A., “Reliability and Metrology Features for Manufacturing Process of Nanoelements for Geo-Environmental Protection”, In IEEE Nanotechnology for Instrumentation and Measurement (NANO IM) 2018, p. 1-4, Mexico City, Mexico, 7-8 Nov. 2018, doi: 10.1109/NANOFIM.2018.8688605 Blois L., Blois C. A., Caponi M., “Modelli e Metodi per lo Studio ed il Monitoraggio di Aree a Rischio Idrogeomorfologico”, Convegno Nazionale di Idraulica e Costruzioni idrauliche, Ancona, Italy, 12-14 Sept 2018 Strutture civili e Geotecnica 2023 Grande, E., Fagone, M., Rotunno, T., Milani, G. Modeling of shear-lap tests of flat and curved masonry specimens strengthened by FRCM. Structures, 2023, 52, pp. 437–448. Rotunno, T., Fagone, M., Grande, E., Milani, G. FRCM-to-masonry bonding behaviour in the case of curved surfaces: Experimental investigation. Composite Structures, 2023, 313, 116913. da Silva, L.C.M., Grande, E., Milani, G. Simplified Numerical Tool for a Fast Strength Estimation of Squared Masonry Columns Reinforced with FRP Jackets. Lecture Notes in Civil Engineering, 2023, 317 LNCE, pp. 253–264 Cima, V., Tomei, V., Grande, E., Imbimbo, M.: “Fragility curves for residential unreinforced masonry buildings prone to out-of-plane mechanisms: the case of the historical center of Sora”. Procedia Structural Integrity, 2023, 44: 211-218. Cima, V., Tomei, V., Grande, E., Imbimbo, M.: “Fragility curves for out-of-plane mechanisms of unreinforced masonry buildings in aggregate: the case of an Italian historical center”. 41° Convegno Nazionale Gruppo Nazionale di Geofisica della Terra Solida, Bologna, 7-9 febbraio 2023. 2022 Cima, V., Bartolomeo, C., Grande, E., Imbimbo, M. “Natural Fibers for Out-of-Plane Strengthening Interventions of Unreinforced Masonry Buildings in Aggregate Configuration”, Sustainability (Switzerland), 2022, 14(16), 9967 Grande, E., Milani, G., Rotunno, T., Fagone, M., “Numerical study of the effect of Post-Liquefaction settlements on the response of infilled RC-frames”, Structures, 2022, 45, pp. 475–488 Grande, E., Bertolesi, E., Milani, G., Rotunno, T., Fagone, M. “Curved masonry supports strengthened with TRM materials: Advanced Fe modelling”, AIP Conference Proceedings, 2022, 2611, 080006. Bertolesi, E., Grande, E., Milani, G. “Closed-form solution for NSM strengthening systems applied to brittle substrates”, AIP Conference Proceedings, 2022, 2611, 080005 Bertolesi, E., Grande, E., Milani, G. “Modeling approaches and computational methods for masonry structures strengthened by fiber reinforced composite materials”, AIP Conference Proceedings, 2022, 2611, 080001 Mele L., Lirer S., Flora A. (2022). “An Energetic interpretation of liquefaction laboratory tests on partially satutared soils”, Journal of Geotechnical and Geoenvironmental Engineering ASCE 148(10). Mele L., Lirer S., Flora A. (2022). “Evaluation of cyclic resistance and post-liquefaction volumetric strains of intermediate soils”, Technical note. Journal of Geotechnical and Geoenvironmental Engineering ASCE 148(10). Mele L., Lirer S., Flora A. (2022). Liquefaction triggering of non-saturated sandy soils. Geotechnique Letters 13-1-6. https://doi.org/10.1680/jgele.22.00076 Fantera L., Lirer S., Desideri A., Rampello S. (2022). “Efficiency of piles stabilising slopes in fine grained soils”, International Journal of Geomechanics 22(9) – DOI 10.1061/(ASCE)GM.1943-5622.0002478. Flora A., Lirer S., Mele L. (2022). “Mitigation of Liquefaction Risk by Innovative Ground Improvement Techniques”, Indian Getechnical Journal. https://doi.org/10.1007/s40098-022-00612-4 Gargano S., Lirer S., Flora A. (2022). Relative relevance of factors affecting the electrokinetic dewatering of soft clayey soils. Ground Improvement. https://doi.org/10.1680/jgrim.20.00023 Tomei, V., Grande, E., Imbimbo, M. “Design optimization of gridshells equipped with pre-tensioned rods”, Journal of Building Engineering, 2022, 52, 104407. Bertolesi, E., Fagone, M., Rotunno, T., Grande, E., Milani, G. “Experimental characterization of the textile-to-mortar bond through distributed optical sensors”, Construction and Building Materials, 2022, 326, 126640. Rotunno, T., Fagone, M., Ranocchiai, G., Grande, E. “Micro-mechanical FE modelling and constitutive parameters calibration of masonry panels strengthened with CFRP sheets”, Composite Structures, 2022, 285, 115248. Grande, E., Lirer, S., Milani, G. “Simple approach to evaluate the influence of seismic residual displacements on post-liquefaction settlements of RC-frames”. Structures, 2022, 37, pp. 411–425. Fagone, M., Ranocchiai, G., Rotunno, T., Grande, E. “Predictive Capability of a Finite Element Micro-Mechanical Model for Masonry Elements Reinforced Using CFRP”, Key Engineering Materials, 2022, 916 KEM, pp. 186–192. Bertolesi, E., Fagone, M., Grande, E., Milani, G., Rotunno, T. “Advanced and Simplified Modeling Approaches for the Study of the Bond Behavior of FRP Systems on Curved Masonry Substrates”, Key Engineering Materials, 2022, 916 KEM, pp. 172–179. Fagone, M., Rotunno, T., Bertolesi, E., Grande, E., Milani, G. “Experimental Study on the Local Behavior of CFRP Anchor Spikes Fixed to Masonry Substrates”, Key Engineering Materials, 2022, 916 KEM, pp. 361–368. Tomei, V., Grande, E., Imbimbo, M. “Influence of Pretensioned Rods on Structural Optimization of Grid Shells”, Lecture Notes in Civil Engineering, 2022, 217, pp. 93–100. Grande, S. Lirer, G. Conte, D. Nostrali, G. Milani. “Analysis of the seismic safety condition of the defensive walls of Cittadella”, Geotechnical Engineering for the Preservation of Monuments and Historic Sites III – Edited By Renato Lancellotta, Carlo Viggiani, Alessandro Flora, Filomena de Silva, Lucia Mele. CRC Press – London. eBook ISBN9781003308867. Modoni, M. Imbimbo, M. Serpe, E. Polito, M. Saccucci, R.L. Spacagna, E. Grande, M. Caponero, M.L. Mongelli, M. Valenti. “Geotechnical-structural engineering for the preservation of Ninfeo Ponari in Roman Casinum”, Geotechnical Engineering for the Preservation of Monuments and Historic Sites III – Edited By Renato Lancellotta, Carlo Viggiani, Alessandro Flora, Filomena de Silva, Lucia Mele. CRC Press – London. eBook ISBN9781003308867. Cima, V. Tomei, E. Grande, M. Imbimbo. “Fragility curves for URM buildings typologies in a historical center of Central Italy: the influence of seismic input”, Gruppo Nazionale di Geofisica della Terra Solida – 40° Convegno Nazionale 27 – 29 giugno 2022. Trieste – stazione marittima. 2021 Ventini R., Lirer S., Mancuso C., Flora A. “Simplified Procedure to identify the critical state line of crushable rockfills”, Journal of Geotechnical and Geoenvironmental Engineering ASCE 2021, 147 (12). Flora A., Bilotta E., Chiaradonna A., Lirer S., Mele L., Pingue L., “A field trial to test the efficiency of induced partial saturation and horizontal drains to mitigate the susceptibility of soils to liquefaction”, Bullettin of Earthquake Engineering 2021, 19 (10), p. 3865-3893, https://doi.org/10.1007/s10518-020-00914-z. Mele L., Chiaradonna A., Lirer S., Flora A., “A robust empirical model to estimate earthquake-induced excess pore water pressure in saturated and unsaturated soils”, Bullettin of Earthquake Engineering 2021, Special Issue LIQUEFACT. DOI 10.1007/s10518-020-00970-5 Cima, V., Tomei, V., Grande, E., Imbimbo, M. “Fragility curves at regional basis for unreinforced masonry buildings prone to out-of-plane mechanisms: the case of Central Italy”, Structures, 2021, 34, pp. 4774–4787. Blois, L. “Estimate of the uniaxial compressive strength of sandstones, using Schimdt Hammer rebound number, in the Quarry situated in “Cerreto Alto” of Panicale (Italy)”, (2021) proceedings EUROCK 2021 – Rock Mechanics Symposium, Torino, 20-23 Sep. 2021, art. no. 1411. Milani, G., Grande, E., Bertolesi, E., Rotunno, T., Fagone, M. Debonding mechanism of FRP strengthened flat surfaces: Analytical approach and closed form solution. Construction and Building Materials, 2021, 302, 124144. Bertolesi, E., Grande, E., Fagone, M., Milani, G., Rotunno, T. Mechanical model based on a BVP for FRPs applied on flat and curved masonry pillars with anchor spikes. Composite Structures, 2021, 273, 114251. Grande, E., Imbimbo, M., Napoli, A., Nitiffi, R., Realfonzo, R. A Nonlinear Macro-Model for the Analysis of Monotonic and Cyclic Behaviour of Exterior RC Beam-Column Joints. Frontiers in Materials, 2021, 8, 719716. Grande, E., Imbimbo, M., Napoli, A., Nitiffi, R., Realfonzo, R. A macro-modelling approach for RC beam-column exterior joints: first results on monotonic behaviour. Journal of Building Engineering, 2021, 39, 102202. Grande, E., Milani, G. Numerical study of the bond behavior of DMF systems. Structures, 2021, 31, pp. 921–939. Grande, E., Milani, G. Modeling of FRCM strengthening systems externally applied on curved masonry substrates. Engineering Structures, 2021, 233, 111895. Grande, E., Milani, G. Procedure for the numerical characterization of the local bond behavior of FRCM. Composite Structures, 2021, 258, 113404. Tomei, V., Grande, E., Imbimbo, M. Influence of geometric imperfections on the efficacy of optimization approaches for grid-shells. Engineering Structures, 2021, 228, 111502. Caponero, M.A., Mongelli, M., Imbimbo, M., …Polito, E., Grande, E. Structural monitoring of the ninfeo ponari by fibre optic sensors, photogrammetry and laser scanning. Archeologia e Calcolatori, 2021, pp. 223–232. Saccucci, M., Cima, V., Grande, E., Imbimbo, M., Pelliccio, A. The Knowledge Process in the Seismic Assessment of Masonry Building Aggregates – An Italian Case Study. Springer Series in Geomechanics and Geoengineering, 2021, pp. 330–347. 2020 Bertolesi, E., Milani, G., Fagone, M., Rotunno, T., Grande, E., “Heterogeneous FE model for single lap shear tests on FRP reinforced masonry curved pillars with spike anchors”, (2020) Construction and Building Materials, 258, art. no. 119629, DOI: 10.1016/j.conbuildmat.2020.119629 Milani, G., Grande, E., “Simple bisection procedure in quickly convergent explicit ODE solver to numerically analyze FRCM strengthening systems”, (2020) Composites Part B: Engineering, 199, art. no. 108322, DOI: 10.1016/j.compositesb.2020.108322 Milani, G., Fagone, M., Rotunno, T., Grande, E., Bertolesi, E., “Development of an interface numerical model for C-FRPs applied on flat and curved masonry pillars”, (2020) Composite Structures, 241, art. no. 112074, DOI: 10.1016/j.compstruct.2020.112074 Grande, E., Milani, G., “Numerical simulation of the tensile behavior of FRCM strengthening systems”, (2020) Composites Part B: Engineering, 189, art. no. 107886, DOI: 10.1016/j.compositesb.2020.107886 Grande, E., Milani, G., Bertolesi, E., Fagone, M., Rotunno, T., “Modeling of the Tensile Behavior FRCM Systems for Repair and Strengthening Interventions of Masonry Structures”, (2020) Frontiers in Built Environment, 6, art. no. 51, DOI: 10.3389/fbuil.2020.00051 Grande, E., Milani, G., Imbimbo, M., “Theoretical model for the study of the tensile behavior of FRCM reinforcements”, (2020) Construction and Building Materials, 236, art. no. 117617, DOI: 10.1016/j.conbuildmat.2019.117617 Grande, E., Imbimbo, M., Tomei, V., “Optimization Strategies for Grid Shells: The Role of Joints”, (2020) Journal of Architectural Engineering, 26 (1), art. no. 04019025, DOI: 10.1061/(ASCE)AE.1943-5568.0000375 Fagone, M., Rotunno, T., Bertolesi, E., Grande, E., Milani, G., “An experimental study on the effectiveness of CFRP reinforcements applied to curved masonry pillars”, (2020) Lecture Notes in Mechanical Engineering, pp. 2134-2148. DOI: 10.1007/978-3-030-41057-5_170 Bertolesi, E., Milani, G., Grande, E., Fagone, M., Rotunno, T., “Numerical analysis of the bond behavior of frp applied to masonry curved substrates with anchor spikes”, (2020) Lecture Notes in Mechanical Engineering, pp. 2149-2161. DOI: 10.1007/978-3-030-41057-5_171 Grande, E., Milani, G., Formisano, A., Ghiassi, B., Fabbrocino, F., “Bond behaviour of FRP strengthening applied on curved masonry substrates: Numerical study”, (2020) International Journal of Masonry Research and Innovation, 5 (3), pp. 303-320. DOI: 10.1504/IJMRI.2020.107980 Gargano S., Lirer S., Liguori B. Flora A. (2020). “Effects of electro-osmosis on soft clayey soil with water of different salinity”. Soils and Foundations, in press. https://doi.org/10.1016/j.sandf.2020.06.003. Zullo R., Verdolotti L., Liguori B., Lirer S., Salzano de Luna M., Malara P., Filippone G. (2020). “Effect of rheology evolution of a sustainable chemical grout, sodium silicate based, for low pressure grouting in sensitive areas urbanized or historical sites”. Construction and Building materials, Vol. 230 https://doi.org/10.1016/j.conbuildmat.2019.117055 Chiaradonna A., Lirer S., Flora A. (2020). “A damage-based liquefaction potential index for microzonation studies”. Engineering Geology 272. https://doi.org/10.1016/j.enggeo.2020.105620. Flora A., Bilotta E., Chiaradonna A., Lirer S., Mele L., Pingue L. (2020). “A field trial to test the efficiency of induced partial saturation and horizontal drains to mitigate the susceptibility of soils to liquefaction”. Bulletin of Earthquake Engineering – Special Issue LIQUEFACT- in press. https://doi.org/10.1007/s10518-020-00914-z. Mele L., Chiaradonna A., Lirer S., Flora A. (2020). “A robust empirical model to estimate earthquake-induced excess pore water pressure in saturated and unsaturated soils”. Bulletin of Earthquake Engineering – Special Issue LIQUEFACT. DOI 10.1007/s10518-020-00970-5 Lirer S., Chiaradonna A., Mele L. (2020). “Soil Liquefaction: from mechanisms to effects on built environment”. Rivista Italiana di Geotecnica RIG (3) 2020. dx.doi.org/10.19199/2020.2.0557-1405.025 Pietrosanti, D., De Angelis, M., Basili, M., “A generalized 2-DOF model for optimal design of MDOF structures controlled by Tuned Mass Damper Inerter (TMDI)”, International Journal of Mechanical Sciences, 2020, 185, 105849 Basili, M., Casini, P., Morelli, L., Vestroni, F., “Vibration mitigation of rail noise barriers by hysteretic absorbers”, Journal of Applied and Computational Mechanics, 2020, DOI: 10.22055/JACM.2020.32360.2044 Basili, M., De Angelis, M., “Preliminary experimental results of shaking table tests on mdof structure equipped with non-conventional tmd”, Lecture Notes in Mechanical Engineering, 2020, pp. 223–232 2019 Rotunno, T., Fagone, M., Bertolesi, E., Grande, E., Milani, G., “Curved masonry pillars reinforced with anchored CFRP sheets: An experimental analysis”, (2019) Composites Part B: Engineering, 174, art. no. 107008, DOI: 10.1016/j.compositesb.2019.107008 Grande, E., Fagone, M., Rotunno, T., Bertolesi, E., Milani, G., “Modelling of the bond behaviour of curved masonry specimens strengthened by CFRP with anchor spikes”, (2019) Composites Part B: Engineering, 171, pp. 235-245. DOI: 10.1016/j.compositesb.2019.04.027 Valente, M., Milani, G., Grande, E., Formisano, A., “Historical masonry building aggregates: advanced numerical insight for an effective seismic assessment on two row housing compounds”, (2019) Engineering Structures, 190, pp. 360-379. DOI: 10.1016/j.engstruct.2019.04.025 Capozucca, R., Grande, E., Milani, G., “Fiber reinforced polymer strengthened masonry: Delamination, experimental and numerical issues”, (2019) Numerical Modeling of Masonry and Historical Structures: From Theory to Application, pp. 537-583. DOI: 10.1016/B978-0-08-102439-3.00015-4 Grande, E., Ghiassi, B., Imbimbo, M., “Theoretical and FE models for the study of the bond behavior of FRCM systems”, (2019) Numerical Modeling of Masonry and Historical Structures: From Theory to Application, pp. 685-712. DOI: 10.1016/B978-0-08-102439-3.00019-1 Ghiassi, B., Oliveira, D.V., Grande, E., Lignola, G.P., “Pushover analysis of fiber-reinforced polymer-strengthened masonry”, (2019) Numerical Modeling of Masonry and Historical Structures: From Theory to Application, pp. 629-657. DOI: 10.1016/B978-0-08-102439-3.00017-8 Fabbrocino, F., Formisano, A., Grande, E., Milani, G., “Bond mechanism of FRPs externally applied to curved masonry structures: Experimental outcomes and numerical modeling”, (2019) Key Engineering Materials, 817 KEM, pp. 105-111. DOI: 10.4028/www.scientific.net/KEM.817.105 Grande, E., Imbimbo, M., Marfia, S., Sacco, E., “Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems”, (2019) Frattura ed Integrita Strutturale, 13 (47), pp. 321-333. DOI: 10.3221/IGF-ESIS.47.24 Rotunno, T., Fagone, M., Bertolesi, E., Grande, E., Milani, G., “Some considerations about the effects of the bonding length on the effectiveness of spike anchors in CFRP reinforcements of masonry”, (2019) Key Engineering Materials, 817 KEM, pp. 141-148. DOI: 10.4028/www.scientific.net/KEM.817.141 Caponero, M.A., Grande, E., Imbimbo, M., Modoni, G., Mongelli, M., Polito, E., “Structural health monitoring of the Ninfeo Ponari by combined use of fibre optic sensors, photogrammetry and laser scanning”, (2019) 2019 IMEKO TC4 International Conference on Metrology for Archaeology and Cultural Heritage, MetroArchaeo 2019, pp. 229-233. Gargano. S. Lirer, A. Flora (2019). “Analysis of the coupled electro-osmotic and mechanical consolidation in clayey soils”, Ground Improvement Journal, ISSN: 1365-781X. https://doi.org/10.180/jgrim.18.00010. Mele L., Tan Tian J., Lirer S., Flora A & Koseki J (2019). “Liquefaction resistance of unsaturated sands: experimental evidences and theoretical interpretation”. Geotechnique 69(6): 541-553 Capasso I., Lirer S., Flora A., Ferone C., Cioffi R., Caputo D., Liguori B. (2019) “Reuse of mining waste as aggregates in fly ash based geopolymers”, Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.02.164 Lirer S., Mele L. (2019). “On the apparent viscosity of granular soils during liquefaction tests”, Bulletin of Earthquake Engineering. DOI 10.1007/s10518-019-00706-0 Gargano S., Lirer S., Flora A. (2019). “Mechanical and physical effects of electro-osmotic dewatering of clayey soils”, Convegno Nazionale dei ricercatori di Ingegneria Geotecnica CNRIG2019, Lecco, 3-5 luglio 2019. Mele L., Lirer S., Flora A. (2019. “The effect of densification on Pieve di Cento sands in cyclic simple shear tests”, Convegno Nazionale dei ricercatori di Ingegneria Geotecnica, Politecnico di Milano, Polo territoriale di Lecco, 3-5 luglio 2019. Ventini R., Flora A., Lirer S., Mancuso C. (2019). “On the effect of grading and degree of saturation on rockfill volumetric deformation”, Convegno Nazionale dei ricercatori di Ingegneria Geotecnica, Politecnico di Milano, Polo territoriale di Lecco, 3-5 luglio 2019. Lirer S., Bilotta E., Chiaradonna A., Fasano G., Flora A., Mele L., Nappa V. (2019). “Comparative analysis of soil liquefaction mitigation measures”, XVII European Conference on Soil Mechanics and Geotechnical Engineering ECSMGE 2019 “, Reykjavik 2019. Bilotta E., Chiaradonna A., Fasano G., Flora A., Mele L., Nappa V., Lirer S., Fioravante V. (2019). “Comparative analysis of SoA liquefaction mitigation measures”. IABSE Symposium, March 27-29 2019, Guimares, Portugal. Gargano S, Lirer S, Liguori B, Flora A (2019). “Experimental analysis of the effect of electrokinetic treatment of soils”. 7th International Symposium on Deformation Characteristics of Geomaterials, IS-GLASGOW 2019, Glasgow 26th – 28th June 2019. Ventini R., Flora A., Lirer S., Mancuso C. (2019). “Magnetic measurement system of sandy gravel specimens shape during tests in a large triaxial apparatus”, 7th International Symposium on Deformation Characteristics of Geomaterials, IS-GLASGOW 2019, Glasgow 26th – 28th June 2019. Mele L., Lirer S., Flora A. (2019). “The effect of confinement in liquefaction tests carried out in a cyclic simple shear apparatus”. 7th International Symposium on Deformation Characteristics of Geomaterials, IS-GLASGOW 2019, Glasgow 26th – 28th June 2019. Mele L., Lirer S., Flora A. (2019). “The specific deviatoric energy to liquefaction in saturated cyclic triaxial tests”, Proc. of the 7th Int. Conference on Earthquake Geotechnical Engineering (ICEGE 2019), Roma, 17-20 June 2019. Mele L., Lirer, S. & Flora, A. (2019). “A liquefaction surface to describe liquefaction phenomena in unsaturated sandy soils”, Proc. of the 7th Int. Conference on Earthquake Geotechnical Engineering (ICEGE 2019), Roma, 17-20 June 2019. Basili, M., Vestroni, F., Marcari, G., “Brick masonry panels strengthened with textile reinforced mortar: experimentation and numerical analysis”, Construction and Building Materials, 2019, 227, 117061 Basili, M., Casini, P., Morelli, L., Vestroni, F., “A hysteretic absorber to mitigate vibrations of rail noise barriers”, Journal of Physics: Conference Series, 2019, 1264(1), 012033 Basili, M., De Angelis, M., Pietrosanti, D., “Defective two adjacent single degree of freedom systems linked by spring-dashpot-inerter for vibration control”, Engineering Structures, 2019, 188, pp. 480–492 2018 Bertolesi, E., Milani, G., Grande, E., Fagone, M., Rotunno, T., “Delamination of FRP reinforced curved masonry pillars: Experimentation and advanced numerical analyses”, (2018) AIP Conference Proceedings, 2040, art. no. 090003. DOI: 10.1063/1.5079149 Bertolesi, E., Milani, G., Fagone, M., Rotunno, T., Grande, E., “Micro-mechanical FE numerical model for masonry curved pillars reinforced with FRP strips subjected to single lap shear tests”, (2018) Composite Structures, 201, pp. 916-931. DOI: 10.1016/j.compstruct.2018.06.111 Grande, E., Fagone, M., Rotunno, T., Bertolesi, E., Milani, G., “Coupled interface-based modelling approach for the numerical analysis of curved masonry specimens strengthened by CFRP”, (2018) Composite Structures, 200, pp. 498-506. DOI: 10.1016/j.compstruct.2018.05.118 Rotunno, T., Fagone, M., Bertolesi, E., Grande, E., Milani, G., “Single lap shear tests of masonry curved pillars externally strengthened by CFRP strips”, (2018) Composite Structures, 200, pp. 434-448. DOI: 10.1016/j.compstruct.2018.05.097 Grande, E., Imbimbo, M., Sacco, E., “Numerical investigation on the bond behavior of FRCM strengthening systems”, (2018) Composites Part B: Engineering, 145, pp. 240-251. DOI: 10.1016/j.compositesb.2018.03.010 Grande, E., Milani, G., “Interface modeling approach for the study of the bond behavior of FRCM strengthening systems”, (2018) Composites Part B: Engineering, 141, pp. 221-233. DOI: 10.1016/j.compositesb.2017.12.052 Grande, E., Imbimbo, M., Tomei, V., “Structural Optimization of Grid Shells: Design Parameters and Combined Strategies”, (2018) Journal of Architectural Engineering, 24 (1), art. no. 04017027, DOI: 10.1061/(ASCE)AE.1943-5568.0000286 Grande, E., Imbimbo, M., Tomei, V., “Role of global buckling in the optimization process of grid shells: Design strategies”, (2018) Engineering Structures, 156, pp. 260-270. DOI: 10.1016/j.engstruct.2017.11.049 Grande, E., Ruotolo, G., “Design of SMA-brace devices for the seismic retrofit of steel CBF”, (2018) Open Civil Engineering Journal, 12, DOI: 10.2174/1874149501812010001 Bertolesi, E., Grande, E., Milani, G., “Numerical modelling of the bond behaviour of FRCM systems externally applied to masonry substrates”, (2018) Proceedings of the International Masonry Society Conferences, 0 (222279), pp. 2172-2181. Grande, E., Imbimbo, M., Marfia, S., Sacco, E., “Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems”, (2018) Procedia Structural Integrity, 9, pp. 257-264. DOI: 10.1016/j.prostr.2018.06.037 Bertolesi, E., Milani, G., Ghiassi, B., Grande, E., “Full 3D FE micro-modelling for single lap shear tests on FRCM reinforcing systems”, (2018) Proceedings of the International Masonry Society Conferences, 0 (222279), pp. 2250-2258. Nitiffi, R., Imbimbo, M., Grande, E., Oliveira, D.V., “Numerical seismic assessment of masonry made of compressed earth blocks”, (2018) IABSE Symposium, Nantes 2018: Tomorrow’s Megastructures, pp. S23-157-S23-164. Fagone, M., Rotunno, T., Grande, E., Bertolesi, E., Milani, G., “The influence of the joint thickness on the adhesion between CFRP reinforcements and masonry arches”, (2018) Procedia Structural Integrity, 11, pp. 258-265. DOI: 10.1016/j.prostr.2018.11.034 Mele L., Flora A., Lirer S., d’Onofrio A., Bilotta E. (2018). “Experimental study of the injectability and effectiveness of laponite mixtures as liquefaction mitigation technique”, 5th Geotechnical earthquake Engineering and Soil Dynamics Conference, GEESD V 2018, Austin (Texas). Basili, M., De Angelis, M., Pietrosanti, D., “Modal analysis and dynamic response of a two adjacent single degree of freedom systems linked by spring-dashpot-inerter elements”, Engineering Structures, 2018, 174, pp. 736–752